Jump to content
SAU Community

Recommended Posts

Pretty sure the tail lights on the GT-T you've pictured are only that way on the 4 door models. Get a 2 door GT-T and it has the different lights, still a different rear bar to the GTR obviously tho

2 Door GT-T:

http://upload.wikimedia.org/wikipedia/comm...6/6c/R34gtt.png

Edited by Scottydoo
is it still possible to custom a 4 door to look like that?

yes

someone has done it before

a black GT-T 4 door with 2 door lights

try searching here....if not then it might have been the GT-R UK forum ive seen it in.

LOL so you just asked if you can customise a GTT to look like the second picture but then you state that both are GTTs.. im assuming you are some 15yr old kid with high hopes..

simply put the 4 door have different rear end to the 2 door.. lots of differences, diff boot, light housings, etc.. so will be costly to do

the reverse lights down the bottom are standard on GTT Coupe (as the second pic is a gt/gtt as the GTR has a red fog light) it looks like the owner has stuck some sort of cover over it

simply put you cannot swap 2dr tail lights with 4dr lights and vice versa, i would be a costly procedure to have it done custom.

Do a search in here, there are numerous threads discussing this with a lot of feedback, most of which end with it being too much effort for something so small

and as stated, the grey car you posted is a gtt 4dr and the red is a gtt 2dr, not a customized 4dr

thanks guys for clearing it up. I too was considering it but knowing little about the r34's i waited to see if i tripped over this type of thread before asking too seriously.

I noticed the different lines and shape in the rear but wasnt sure if there was any unknown or rarely done way of interchanging them.

Now that ive gotten used to the rear lights of the gtt 4 door im pretty happy with em, maybe some light custom work later perhaps...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...