Jump to content
SAU Community

Wtb: R32 Gtr Rb26dett Sump/xfer Case; Itb's/plenum

dorifticon

By dorifticon,
in Wanted to Buy

 Share

Recommended Posts

dorifticon Community Regular

dorifticon

Posted
Posted

Hey guys

I'm chasing a full 4WD sump/front diff/etc assembly from an r32 GTR. I figured someone may have one kicking around if (for example) they have dropped an rb26 into their RWD GTS-t or similar.

Anyway, if you're looking to get rid of one for a reasonable price, shoot me a txt or give me a call on 0415 838 790 (please note I DON'T get to access the forums that often).

I am located in Canberra, and regularly travel to Sydney, so could pick up from either of those places - however anywhere else and would need to talk postage.

NOt in a massive rush, but if you have one to get rid of at a good price let me know.

I would also be interested in the individual throttle setup for an r32 GTR, including the inlet plenum that sits between the itb's and the cylinder head (but NOT the big log-style inlet tank between the intercooler and the itb's, if that makes sense.

AGAIN, please PHONE or TXT, I don't get to access my messages here often.

Andrew

0415 838 790

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • djr81
      RB26DETT Sketchy boost mod?

      By djr81 · Posted

      Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
×
×
  • Create New...