Jump to content
SAU Community

Fmic, Induction Pipe And Boost Control

Stevodm

By Stevodm,
in Engines & Forced Induction

 Share

Recommended Posts

Bennett Mentor

Bennett

Posted
Posted
the induction pipe is a piece of shiit. installed it today. doesnt look like it hooks up with the BOV return but it doesnt hook up to the oil pipe to the head. had to get some new hose. shiit quality too. got it and it looked like it had been slid on a floor. no extra induction noise and no dose or anything like that. i suggest u get a custom one made up. just a couple of silicone adaptors, say 90degree bent 2inch to 3inch piece (guessing), to a 3 inch piece of pipe and another silicone joiner to the AFM. then just drill holes and weld on the extras u need.

What did you expect would happen? The stock intake pipe has holes for the metal bov return and oil breather to slot into so obviously that wasnt going to work without some hoses. And when you look at the placement, its not even near where the originals holes are.

I dont understand how these guys sell so many when everyone who buys one just ends up pissed off. Classic example of getting what you pay for.

And what do you mean 'no dose'. If your bov is blocked off then it should dose even with the rubber intake and be a fair bit louder with the metal intake. Unless your still running an air box, in which case dont ever expect a loud flutter if thats what your after..

Stevodm Apprentice

Stevodm

Posted
  • Author
Posted
DASHMAT!!! NONONONONO!!

Spray-on dash protector...that will do fine! Just give it a fresh coat once a month. Basic interior maintainance. Not hard.

Thanks...... Wasn't aware of this product.

To SLY_25T. Sorry to hear that the induction pipe was such a piece.....I guess I won't be getting that one then :cool:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Nizzy_R34
      r34's love to squeal

      By Nizzy_R34 · Posted

      just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • Duncan
      Engine sputter

      By Duncan · Posted

      My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Duncan
      S1 Autech 260RS Wiring Diagrams

      By Duncan · Posted

      Awesome, thanks for sharing!
    • Duncan
      Nissan fuga 450gt android screen

      By Duncan · Posted

      To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...