Jump to content
SAU Community

Recommended Posts

Guy's,

Selling the wifes R33 Series 1 GTST M SPEC (MANUAL) as we have four cars and need to cull it to two (she gets to drive the 4cyl 4wd lol). ****Also getting rid of an EH Wagon if anyone knows someone interested in an old school cruiser.****

WHATS GOOD - ;

Stock standard (so not boosted or thrashed), Trust front lip, 17 inch Black Works Rims with Red ring around outside with 245/17's with about 95% tread (wife and I couldn't drop a skid if we tried), Kakimoto Exhaust (nice note- never been hassled by the po po), Braced Apexi Pod Filter, has a nice looking grill which I don't believe is standard and also. Sony headunit and pioneer speakers. Interior is pretty clean, has factory skyline floor mats but also could do with a clean (We have three kids and two little kids and this is the wifes daily).

KILOMETERS - Car is a bee's d!ck away from 130k.

WHATS BAD - Front drivers door window stopped working about two weeks ago (I haven't bothered having it looked at despite the wife's pleads). It went up and then hasn't moved since. Top of steering wheel is dry and cracked, Front lip has scratches and some cracks as women don't know how to drive in and out of driveways lol. Unbeknown to us when we bought it (As I looked at it on a late Saturday Arvo, drove it and then picked it up on a Monday) some bast@rd had keyed the car about a third down the left side which was touched up by the previous owner (Visible when closer to the car) and cuz it gets stored outside in the open the Paint could do with a buff. I can arrange getting the side where the key mark is resprayed and a full car buff for about $700.

LOCATION - Browns Plains, Logan, Brisbane

RWC - will be included as car drives like a dream and has no mechanical problems whatsover. Just about to have a service Oil and Filter & plugs

PRICE - $10,000 slight movement possible as I can source stock wheels and roadworthy tyres as I would be happy to keep the wheels for my car to use on the track. Also comes with 6 months rego.

PHOTO'S - Coming just gotta give her a tub

CONTACT - PM or phone text Bill on 0422886721

Photo's now up.

NOTE - The paint being BLACK and parked outside in the open, NEEDS A BUFF as after I washed it I can see fine scratches all over it (That's what you get with black). I can factor this into the pricing and have it done before receiving if wanted.

Also the key mark is not massive as it is quite thin but it is just enough that to fix it properly you would need to give it a spray over.

The wheels are WORK REZAX wheels and the tyres are actually 235 fronts and 255 backs.

Car is getting serviced tomorrow as its latest five thousand k's are up.

We bought the car about a year ago and have racked up 10k since ownership (wife drives it to and from work and thats about it). We changed the oil and filter when we bought it, again at 125k and now at 130k.

Also wife said that the window was working the other day but has stopped again. Seems to look like a switch problem.

Anyway I believe this car is priced well to sell and am giving Skylines Australia a go before I go to carsales etc.

Also I have the standard airbox as the previous owner had the pod on when I bought it.

Not desperate or in a hurry to sell so please no stupid offers.........

Cheers

Bill (Imtorqing)

post-19906-1240473977_thumb.jpg

post-19906-1240473991_thumb.jpg

post-19906-1240474003_thumb.jpg

post-19906-1240474017_thumb.jpg

post-19906-1240474029_thumb.jpg

post-19906-1240474041_thumb.jpg

post-19906-1240474160_thumb.jpg

post-19906-1240474171_thumb.jpg



  • Similar Content

  • Latest Posts

    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
×
×
  • Create New...