Jump to content
SAU Community

Recommended Posts

GTR pumps are noisier than GTS-t pumps.

Most of the import nissans have a switching current thing happening so the pump runs slower at idle and makes less noise.

Silvias and 180s definately have it. I'd be pretty sure the GTS-t has it too if your pump gets noisier off idle.

Only way to be certain it's ok is to have it checked out by a pro if your really worried

Dan. Yes it is normal.

All gtr fuel pumps are like that..

The one I just got put in is the same.

at idle is is a slight hiss and as soon as you touch the accelerator, it goes in to a high psssss sound, then back to low when it gets back to idle..

it's fine.. don't worry about it..

I put a Bosch 040 pump in my GTS-T about a month ago and you can hear it at idle sometimes but when you get going I can't hear it at all (engine noise and other noises take over it).

Was the pump mounted intank ?

Jay95R33 - I have a mate that has a R33 GTR and you can't hear the pump in his car either. That's why i was getting worried. Maybe they have insulation to stop you from hearing them.

But, after making some phone calls, getting the pump checked and judging by the comments on here, the pump is 100% fine.

GTST - It is a R33 V-Spec pump so i'm not sure of what it flows, i just know it performs much better then a standard one !!!

*GTST pump is 135 litres per hour and supports 300 bhp at standard pressure

*GTR pump is 190 litres per hour and supports 420 bhp at standard pressure

*Bosch 910 pump is 200 litres per hour and supports 450 bhp at 73.5 PSI # 0 580 254 910

*Bosch 975 pump is 228 litres per hour and supports 500 bhp at 73.5 PSI # 0 580 254 975

*Bosch 984 pump is 228 litres per hour and supports 500 bhp at 73.5 PSI # 0 580 254 984

*Bosch 044 pump is 330 litres per hour and supports 730 bhp at 73.5 PSI # 0 580 254 044

*Bosch 040 pump is 235 litres per hour and supports 520 bhp at 73.5 PSI # 0 580 254 040

As found from here

I'm using the Bosch 040 which cost $340 supplied and fitted.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...