Jump to content
SAU Community

Recommended Posts

RB25DET long motor - rebuilt with tomei cams $1800

GTR copy front bar - this is a jap FRP bar and fits great, very sturdy although has a few cracks where i hit it. $200

Centre console - good condition $60

Alternator - $80

Turbosmart BOV - $100

Ignitor module - $30

Rear Taillights - $150 for both

Headlights - $300 for both (series 1)

Bonnet (black) - $100

Diff - $150

Cat back exhaust - $200

R33 GTR grill (original) - $100

Clear skyline panel between taillights - $50

Nismo carbon pillars - $30 (comes attached to pillar)

post-749-1240790060_thumb.jpg

post-749-1240790067_thumb.jpg

post-749-1240790075_thumb.jpg

post-749-1240790082_thumb.jpg

post-749-1240790095_thumb.jpg

post-749-1240790103_thumb.jpg

post-749-1240790109_thumb.jpg

post-749-1240790117_thumb.jpg

post-749-1240790194_thumb.jpg

post-749-1240790244_thumb.jpg

post-749-1240790253_thumb.jpg

post-749-1240790402_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/267261-r33-wrecking/
Share on other sites

PM's replied

Alex: You get the long motor, does not have injectors, exhaust manifold, turbo, plenum. So basically head and bottom end together running. Has been off the road for a few months now but was running perfectly when i removed it, have a few vids etc..

Link to comment
https://www.sau.com.au/forums/topic/267261-r33-wrecking/#findComment-4559777
Share on other sites

RB25DET long motor - rebuilt with tomei cams $1800

GTR copy front bar - this is a jap FRP bar and fits great, very sturdy although has a few cracks where i hit it. $200

Centre console - good condition $60

Alternator - $80

Turbosmart BOV - $100

Ignitor module - $30

Rear Taillights - $150 for both

Headlights - $300 for both (series 1)

Bonnet (black) - $100

Diff - $150

Cat back exhaust - $200

R33 GTR grill (original) - $100

Clear skyline panel between taillights - $50

Nismo carbon pillars - $30 (comes attached to pillar)

Link to comment
https://www.sau.com.au/forums/topic/267261-r33-wrecking/#findComment-4560831
Share on other sites

RB25DET long motor - rebuilt with tomei cams $1800

GTR copy front bar - this is a jap FRP bar and fits great, very sturdy although has a few cracks where i hit it. $200

Centre console - good condition $60

Alternator - $80

Turbosmart BOV - $100

Ignitor module - $30

Rear Taillights - $150 for both

Headlights - $300 for both (series 1)

Bonnet (black) - $100

Diff - $150

Cat back exhaust - $200

R33 GTR grill (original) - $100

Clear skyline panel between taillights - $50

Nismo carbon pillars - $30 (comes attached to pillar)

Eii im intersted in the exhaust,

is it stock or did u buy it? +

is it the whole thing and will it fit an r33 s2?

Link to comment
https://www.sau.com.au/forums/topic/267261-r33-wrecking/#findComment-4560839
Share on other sites

PM's replied

Nismo carbon pillars have been sold..

R33gtstseries - the exhaust is an aftermarket item. It is steel with a stainless cannon. I bought the car with it years ago. It is 3.5 inch and comes is from the cat back all through to the end. The cat was changed to a high flow item around 15,000kms ago. Comes with mounting brackets etc.. I dont see why it would not fit a series 2, basically the same car. Send me a Pm if you want to swing by and look at it.

Basti - The grill needs modifying to fit, it sits perfectly between the headlights although you will need to play around with brackets to make it fit. Its not very hard but looks much better than a standard item or replica grill. It has some paint damage to it so could do with a re-spray. PM me if you want pics and ill get some for you.

Link to comment
https://www.sau.com.au/forums/topic/267261-r33-wrecking/#findComment-4561831
Share on other sites

yeah i'd like pics man. i dont mind paint damage cos the front of my car needs respray anyway. whereabouts in melb are you? can i pick up?

edit: oops. you said pm and you are in syd. ok how much for postage?

Link to comment
https://www.sau.com.au/forums/topic/267261-r33-wrecking/#findComment-4571833
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...