Jump to content
SAU Community

Eoi: 1997 R33 Gtst

SexyPete
 Share

Recommended Posts

SexyPete Collaborator

SexyPete

Posted
Posted

1997 white R33 GTST 5 speed manual series 2 coupe

98,000 km's serviced every 5000 with synthetic oil

I am first owner in Australia since 46,000kms

Punches out a streetable 250 rwkw with alot of room for more. Tuned by Adam from JEM at Ingleburn.

Modifications (all parts used were purchased brand new):

ENGINE:

Garrett GT3076 internal gate, low mount

Tomei direct replacement fuel pump

Nismo 555cc injectors

Custom forward facing plenum

Apexi Power FC

Greddy Profec B Spec 2 Boost controller

HKS super Dragger turbo back exhaust

bell mouth stainless dump pipe

High Flow CAT

Z32 AFM

Apexi power intake

Cold air box

Splitfire coil packs

Front mount intercooler

All engine mods have been purposely made to look stock and not draw attention from the prying eyes.

HANDLING AND SUSPENSION:

DBA 4000 cross drilled and slotted rotors all round

KFM racing pads

Braided Brake lines

Tein superstreet coilovers

18" lenso DC6 wheels (not a single mark with near new toyo tread on all 4)

OTHER INFO:

Autowatch alarm and immobilisor installed plus a second immobilisor with pin code installed. Have security certificate for it as well.

Rockford fosgate speakers front an rear powered by sony amp and JVC dvd head unit

Immaculate interior stock looking i.e. power FC and Boost controller concealed

Good paint, no marks some small chips on front bar.

Unlike every other car on SAU this car comes with all stock parts minus the turbo and CAT back exhaust in case it needs to be returned to stock for any defect reasons etc.

STOCK ITEMS:

Intercooler

Injectors

Dump and front pipe

Second Stainless split dump and front pipe (not a stock item)

Plenum

intercooler piping

Brake discs x 4

Air box + snorkel

Coil packs x 2 sets

turbo oil and water lines

4 standard wheels no marks with new tyres

Standard springs and shocks

Standard AFM

Second non genuine z32 AFM

This is a great car and i am so sad to see it go but i must upgrade to a family car with 4 doors and keep the missus happy. I am in no hurry to sell advertising now as the market is slow for skylines and ridiculous offers will not be accepted or considered.

Price is negotiable, i am asking for $17,500 and yes this is slightly higher than most skylines but this car comes with all standard parts worth plenty if sold sperately and peace of mind you have the parts required to pass defects if any.

Please only serious buyers and NO ridiculous offers, if you have any opinions with regards to price please keep them to yourself, there is alot here to justify the price tag. I am a genuine person and hope to find a genuine buyer.

Car must be seen to be appreciated.

Location is Southern Sydney Cronulla region or Singleton (1 hour west of Newcastle)

Contact me 'Peter' on 0405372880 or alternatively PM me

FOR ALL OF THOSE OUT THERE WHO ARE THINKING I WONDER IF HE WILL SEPERATE PARTS ESPECIALLY THE STOCK ONES THE ANSWER IS 'NO' SO DONT BOTHER ASKING UNLESS YOU ARE WILLING TO PAY RIDICULOUS AMOUNTS OF MONEY FOR THEM.

post-32096-1240817216_thumb.jpg

post-32096-1240817409_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/267317-eoi-1997-r33-gtst/
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...