Jump to content
SAU Community

Recommended Posts

1997 white R33 GTST 5 speed manual series 2 coupe

98,000 km's serviced every 5000 with synthetic oil

I am first owner in Australia since 46,000kms

Punches out a streetable 250 rwkw with alot of room for more. Tuned by Adam from JEM at Ingleburn.

Modifications (all parts used were purchased brand new):

ENGINE:

Garrett GT3076 internal gate, low mount

Tomei direct replacement fuel pump

Nismo 555cc injectors

Custom forward facing plenum

Apexi Power FC

Greddy Profec B Spec 2 Boost controller

HKS super Dragger turbo back exhaust

bell mouth stainless dump pipe

High Flow CAT

Z32 AFM

Apexi power intake

Cold air box

Splitfire coil packs

Front mount intercooler

All engine mods have been purposely made to look stock and not draw attention from the prying eyes.

HANDLING AND SUSPENSION:

DBA 4000 cross drilled and slotted rotors all round

KFM racing pads

Braided Brake lines

Tein superstreet coilovers

18" lenso DC6 wheels (not a single mark with near new toyo tread on all 4)

OTHER INFO:

Autowatch alarm and immobilisor installed plus a second immobilisor with pin code installed. Have security certificate for it as well.

Rockford fosgate speakers front an rear powered by sony amp and JVC dvd head unit

Immaculate interior stock looking i.e. power FC and Boost controller concealed

Good paint, no marks some small chips on front bar.

Unlike every other car on SAU this car comes with all stock parts minus the turbo and CAT back exhaust in case it needs to be returned to stock for any defect reasons etc.

STOCK ITEMS:

Intercooler

Injectors

Dump and front pipe

Second Stainless split dump and front pipe (not a stock item)

Plenum

intercooler piping

Brake discs x 4

Air box + snorkel

Coil packs x 2 sets

turbo oil and water lines

4 standard wheels no marks with new tyres

Standard springs and shocks

Standard AFM

Second non genuine z32 AFM

This is a great car and i am so sad to see it go but i must upgrade to a family car with 4 doors and keep the missus happy. I am in no hurry to sell advertising now as the market is slow for skylines and ridiculous offers will not be accepted or considered.

Price is negotiable, i am asking for $17,500 and yes this is slightly higher than most skylines but this car comes with all standard parts worth plenty if sold sperately and peace of mind you have the parts required to pass defects if any.

Please only serious buyers and NO ridiculous offers, if you have any opinions with regards to price please keep them to yourself, there is alot here to justify the price tag. I am a genuine person and hope to find a genuine buyer.

Car must be seen to be appreciated.

Location is Southern Sydney Cronulla region or Singleton (1 hour west of Newcastle)

Contact me 'Peter' on 0405372880 or alternatively PM me

FOR ALL OF THOSE OUT THERE WHO ARE THINKING I WONDER IF HE WILL SEPERATE PARTS ESPECIALLY THE STOCK ONES THE ANSWER IS 'NO' SO DONT BOTHER ASKING UNLESS YOU ARE WILLING TO PAY RIDICULOUS AMOUNTS OF MONEY FOR THEM.

post-32096-1240817216_thumb.jpg

post-32096-1240817409_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/267317-eoi-1997-r33-gtst/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
×
×
  • Create New...