Jump to content
SAU Community

Recommended Posts

long story short, i am looking to upgrade my brakes as i want better stopping power, and i can get hold of a set of GTR34 brakes with discs, just wanna know if it will bolt straight on? now i know that i need to trim the hat(the plate behind the disc? not sure what they called) to fit the bigger diameter disc, but i wanna know if the caliper will botl straight on to the existing mount or i need to custom made some brackets to hold them in place.

also, can anyone tell me how good is the gtr34 brembo work? i havent tried them but have compared mine to an EVO8 and they are like 1000 times firmer/stiffer than mine.

any help will be good.

cheers

Link to comment
https://www.sau.com.au/forums/topic/267480-gtt-upgrading-brakes/
Share on other sites

34 gtr brembo work about 25-30% better then Gtt brakes over all, and they should bolt straight on, (sure it only fits a gtr disk since it is bigger then gtt's in dia.)

and also you need a diff. off set wheels to fit that in, since the gtt stock wheels wont fit

(EVO8 and they are like 1000 times firmer/stiffer)= both the GTR and GTT, are towards the loss side compare to evo or sti, (doesnt mean the brakes is shit) that is jsut different style the brakes have in different cars , forexample my 04 cocolla's brakes are firm but come to stopping power that is way less then the gtt, but any the GTR brakes are for sure feel better

all so if you want to improve the brake feel and brake power (firm/stiffer) you can put in a set of good pads, Stanless Mesh brake lines, cusco brake Cylinder stopper . all that not only will help the feel but, should have better performence too

Edited by SKYGTT

thanks for your reply, it is very much appreciated, it has cleared alot of stuff in my mind, i am in the situation of thinking weather to get this brake set or not, i guess now i will compare prices and performance in order to come up with a solution.

cheers.

What pads are you currently running in the GT-T? I noticed a massive difference upgrading just the pads on mine if yours still have the stock pads they are absolutely shocking pads compared to even Ferodo Formulas which have a decent friction coefficient for the $125 trade price an end. My car went from feeling worse than my daily in some situations to a very confident powerful stopping force. If you have the money something like the Ferodo DS2500 is a nice pad, a little pricey, but still cheaper than changing calipers, rotors etc. I upgraded my R33 brakes to R34 GT-T ones and was disappointed with the results but it was the pads letting me down as the calipers still had the stock Nissan pads. Once all changed it was a completely different braking experience felt like you were braking in a different car.

Also what fluid are you using? You will get a slightly better pedal feel, but more importantly it will not boil!, running decent fluid in a properly bled system its amazing how many people upgrade their rotors, pads, caliper etc and then run $5-$10 brake fluid. I currently run the Motul RBF660 and it has never let me down by boiling on a spirited drive. Yes its $40 a bottle and you really need to buy two to do a proper flush out and bleed but its $80 that can stop you loosing all braking power when they get too hot talking from experience here, luckily I don't mind drifting as I was forced to drift around a tight bend to make it around the corner when the brake fluid boiled on me and I lost all braking power. I look at it as cheap insurance and it doesn't need changing that often so its relatively cheap overtime.

If you are still running the stock lines I would keep them did the whole braided line upgrade really wasn't that impressed and after reading autospeeds testing of stock vs braided lines I could see why as the difference in flex is minimal, so minimal its probably impossible to really feel on your foot with a shoes on etc so I ended up swapping back to stock ones R34 ones on my R33 (so they were slightly fresher rubber).

http://autospeed.com/cms/title_Braided-Bra...79/article.html

For anyone reading this with a R33 the best mod I found (yes im giving away my secret as everyone that has met me with a r33 has heard lol) is to fit a R34 GT-T brake booster to the R33. Its a tight squeeze as its almost twice the size just clearing the clutch master and gives you a massive increase in pedal feel. Anyone who has driven cars that are only a couple of years old and in particular european cars + new hyundais would have noticed they have massive pedal feel with huge braking force. In my job I became curious as to how these cars had tiny rotors, relatively small calipers yet fearce stopping power. Upon popping the hood on them they all had very large booster/servo units which lead me to my mates shed where he has every model skyline and we noticed that the R34 GT-T booster was twice the size of the R33 GTS-t! They are reasonably rare as not many wreckers are wrecking R34's yet so may almost be cheaper to buy one new than wreckers but 100% worth the effort. Combine that with good pads and fluid and you will be very happy with your braking force. I too was chasing the Brembo trail till I read about the relatively small improvement they would give given all the financial outlay and effort.

Edited by nigelswazi

thanks for your valuable information, i am still using stock lines with URAS street pads, havent beld the oil yet but will do it soon coz i need to change my pads very very soon. will give the motul oil a go and see what differences are there.

cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...