Jump to content
SAU Community

Stagea Nm35 Mod Parts

Nick Bailey
 Share

Recommended Posts

Bis-e Bee Mentor

Bis-e Bee

Posted
Posted
Hi

Any-one have any info on mod parts for the NM35. I am trying to find coilovers, intercooler kit, pod set-up, ecu, exhaust etc.

Have you had a look through the M35 Info topic to see if some of these are covered there?

Most of these things have been discussed at some point over the past few months, do a search of the topics and you may find most of the answers.

iamhe77 Grand Master

iamhe77

Posted
Posted
Hi

Any-one have any info on mod parts for the NM35. I am trying to find coilovers, intercooler kit, pod set-up, ecu, exhaust etc.

Hi Nick,

Welcome to the forum.

What kind of info are you after?

Company names? Product names? Product numbers?

Nothing special about the NM35 in regards to mods.

Just your usual suspects such as ARC, HKS, Bilstein, Nismo, Blitz etc.

Don't bother looking in Aus unless you are after filters, wheels or brakes.

Almost everything else will have to come from Japan of the US.

Nick Bailey Apprentice

Nick Bailey

Posted
  • Author
Posted
Hi Nick,

Welcome to the forum.

What kind of info are you after?

Company names? Product names? Product numbers?

Nothing special about the NM35 in regards to mods.

Just your usual suspects such as ARC, HKS, Bilstein, Nismo, Blitz etc.

Don't bother looking in Aus unless you are after filters, wheels or brakes.

Almost everything else will have to come from Japan of the US.

Nick Bailey Apprentice

Nick Bailey

Posted
  • Author
Posted
Hi Nick,

Welcome to the forum.

What kind of info are you after?

Company names? Product names? Product numbers?

Nothing special about the NM35 in regards to mods.

Just your usual suspects such as ARC, HKS, Bilstein, Nismo, Blitz etc.

Don't bother looking in Aus unless you are after filters, wheels or brakes.

Almost everything else will have to come from Japan of the US.

Thanks for the help, just picked up my MN35 in Sydney, fresh of the boat. Drove it back to Brisbane, great wagon, can't wait to spend some money on it.

The first thing I am doing is the wheels and coil-overs. I have all the info on who makes them, but am trying to find a decent price.

If any-one has any connections or advice on where to get a the best price on Tein or HKS it would be greatly appreciated.

Could any-one also tell me how to get the auto gear knob of so I can remove the console. Also need to get the dash cover/trim of to remove the CD Player. I have had a look and it is not obvious and I don't want to damage anything.

Thanks

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)
If any-one has any connections or advice on where to get a the best price on Tein or HKS it would be greatly appreciated.

Could any-one also tell me how to get the auto gear knob of so I can remove the console. Also need to get the dash cover/trim of to remove the CD Player. I have had a look and it is not obvious and I don't want to damage anything.

Thanks

Coilovers would be cheaper to get shipped over than to try to get a Tein or HKS Australian supplier to get them in.

Ain't going to be a cheap exercise.

Yep, as stated the gear knob is basic stuff. Just pull the grey plastic base down (you won't break it), pop the u shaped clip out and pull the main part of the knob up (Iain & Stephen - No need to comment).

HERE is how to remove the rest of the console to get behind the cd player

Edited by iamhe77
Bis-e Bee Mentor

Bis-e Bee

Posted
Posted
Yep, as stated the gear knob is basic stuff. Just pull the grey plastic base down (you won't break it), pop the u shaped clip out and pull the main part of the knob up (Iain & Stephen - No need to comment).

Oh sheesh! you just like to spoil all our fun. :cool:

knobs and flanges......

dude youre just leaving it open for me :P

Hmmmm... Knobs and openings, someone is frustrated :happy:

Bis-e Bee Mentor

Bis-e Bee

Posted
Posted
Don't know you that well mate!

But I suppose if that is what floats your boat, than fantasize all you want!

I would be keeping Iain well and truly away from your dump pipe if I was you man :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Cas issue

      By MBS206 · Posted

      Have you done the Ignition Sync Wizard in the AEM software?
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • MBS206
      RB25DE NEO with Haltech ECU

      By MBS206 · Posted

      You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • sonicii
      Could it really happen......

      By sonicii · Posted

      I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...