Jump to content
SAU Community

Recommended Posts

It shouldnt if you have good plugs in there before you start...

I say that because you should always be putting a good set of plugs in before attemping to tune anyhow so its kinda something that shouldn't be asked.

You cant tune a car thats missing or potentially other problems due to shit plugs

Link to comment
https://www.sau.com.au/forums/topic/267658-quick-assist/#findComment-4563633
Share on other sites

It shouldnt if you have good plugs in there before you start...

I say that because you should always be putting a good set of plugs in before attemping to tune anyhow so its kinda something that shouldn't be asked.

You cant tune a car thats missing or potentially other problems due to shit plugs

Awesome that helps alot

So in essence, two things

1) if the spark plugs in there were no good , the car would be almost 'untunable' to begin with

2) if the tuner cant work that out from the start, then he's one dumbass of a tuner

Thanks

:D

Link to comment
https://www.sau.com.au/forums/topic/267658-quick-assist/#findComment-4563655
Share on other sites

Awesome that helps alot

So in essence, two things

1) if the spark plugs in there were no good , the car would be almost 'untunable' to begin with

2) if the tuner cant work that out from the start, then he's one dumbass of a tuner

Thanks

:D

yup, but then one should always supply a car to the tuner ready to be tuned unless otherwise oraganised.

I have listed 4 basic yet common things that potentialy cause issues with customers cars during a tune. Doing the below yourself saves money and it saves time for the customer and me.

Change plugs (prefer copper RB BCPR7ES or SR BKR7E)

Change oil and filter (cheap insurance..... )

Fill with fuel (many come in empty.... pet hate of mine)

Make sure clutch is fit and healthy (this happens alot.... slipping clutches)

Link to comment
https://www.sau.com.au/forums/topic/267658-quick-assist/#findComment-4563671
Share on other sites

yup, but then one should always supply a car to the tuner ready to be tuned unless otherwise oraganised.

I have listed 4 basic yet common things that potentialy cause issues with customers cars during a tune. Doing the below yourself saves money and it saves time for the customer and me.

Change plugs (prefer copper RB BCPR7ES or SR BKR7E)

Change oil and filter (cheap insurance..... )

Fill with fuel (many come in empty.... pet hate of mine)

Make sure clutch is fit and healthy (this happens alot.... slipping clutches)

My turn to agree lol :)

Basically a full service needs to be done IMO - so adding to that, things like fuel, air filter and so on.

Also doesnt hurt to give the AFM's a bit of a clean if you haven't in a year or two.

The more time you spending going over and preparing the car, the less chance of issue, time waste and so on.

You always hear these "horror" stories about workshops taking weeks to fix problems etc - but when they are given a half baked car that there were only going to TUNE... it makes fairly reasonable sense it sits there for a few weeks while troublshooting everything

Link to comment
https://www.sau.com.au/forums/topic/267658-quick-assist/#findComment-4563814
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...