Jump to content
SAU Community

Recommended Posts

hey guys ive been speaking with kyle for a bit and am about to see if we can get some discounts on a few of his amazing manifolds.

Heaps better then the HKS TRUST stuff because its mildsteel and nto stainless. stainless due to its nature is wears out 3 times faster then mildsteel, and is very prone to cracking. im even willing to stake the very lil and useless reputation i have on these forums and say that its honestly the best stuff money can buy!!!!

i havnt confirmed it yet but manifolds will properly be around the $900 or $1000inc delievery for a single turbo split pulse manifold for any rb head.

turn around time is around 2-3 days per manifold and we will need approx 5-7 people for the price quoted above.

if you guys have any questions please post and ill get back when i speak to kyle and confirm everything.

at this stage i am simply trying to gauge an interest. hope thats ok mods.

Cheers

posta1939316boost.th.jpg

Edited by Jap_Muscle
Link to comment
https://www.sau.com.au/forums/topic/267716-eoi-6boost-manifolds/
Share on other sites

alright guys looks like we might be teaming up with the peeps over at Calais Turbo which means we could get even more cheaper stuff.

ill get a price on ceramic coating in ext black OJE730 and get back to you soon.

let me know if you guys need anything else!

so far we have 4 ppl interested

1 = Jap Muscle

2 = two.five

3 = OJE730

4 = mattis96

Edited by Jap_Muscle

Im sort of interested in one of these.

would need an rb25 manifold to suit a gt3040 with 35mm ext gate.

can you get a definite price and how much it is for ceramic coating?

also would we be paying direct to kyle? as you have less than 50 posts and no trader rating... I would feel more comfortable....

Edited by midnight

do you actually want a 35mm gate or a externally gated manifold with a 35mm opening?

any manifold is fine, wether its t28 or t5, rb20 to rb26 and internally gated or externally dosnt matter. so long as its a single setup. you can get twin setups but expect more $$$

i will get a price on coating so hold tight. being a weekend i dont think kyle picks up his phone.

about the payment to kyle. i guess its possible but it just makes the group buy more difficult. ive dealt with kyle many times before and the way he operates is through msgs for orders, so having 10ppl msg him about a single group buy will be very confusing.

is there anything i can do to prove that im legit?

id really like to get some trader points so i dont always get this problem

Edited by Jap_Muscle

I already have the gate. its 35mm diameter,

so id need external gated manifold to suit a 35mm gate.

is there anyone reputable on this site who knows you that can vouch for you? I hope you understand my concerns...

Hey guys i finally got all the prices. you can see them here

http://www.skylinesaustralia.com/forums/Of...ld-t268420.html

ill be keeping this thread as the questions thread in regards to the groupbuy since i cant edit the original post.

some good news turbostyleR, i spoke to kyle and his happy to do SR manifolds aswell. infact you can order what ever you want =D

any questions please post here. and only post in the official thread if you want to place a order.

=D

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...