Jump to content
SAU Community

Please Help! Does Anyone Know Jess R33?

Peter

By Peter,
in Classifieds

 Share

Recommended Posts

Peter Community Regular

Peter

Posted
Posted

Hi Everyone,

I was wondering if you could help me out please.

Recently I transferred money (22/04/2009) to Jess R33 for a PFC and HC post link is:

http://www.skylinesaustralia.com/forums/Po...55#entry4564955

After many PMs back and forth, with the last being Friday evening (24/04/2009) she said that she would post it Saturday.....

Since that PM I haven't heard from her despite sending her several PMs as well as posting twice on the thread.

I am worried that I have lost my money....and not really sure what to do

All I know, besides her bank details, which I won’t put on this thread are:

Name: Jessica

Lives in Rockhampton

Drives a maroon R33

Also selling an Apexi AVCR on a different thread....

Does anyone on this forum or who lives in Rockhampton know her? Can anyone offer any suggestions or help me please?

I really do hope that this is just a misunderstanding and a PM appears tomorrow (or better the PFC arrives) but I am losing hope.....

Thanks,

Peter

Peter Community Regular

Peter

Posted
  • Author
Posted

Thanks for the support and advice guys. Apologies for the link, this one should work....

http://www.skylinesaustralia.com/forums/Po...65#entry4566665

6TR, yeah I'll give it another seven days then contact the police....thanks for the offer axe_s - unfortunately I don't know her address...

Stll hoping for a PM or parcel from her....

Forever optimistic!

Pete

Peter Community Regular

Peter

Posted
  • Author
Posted

Just a FYI....

Hi adrian_r34 or should I say Jess R33,

It’s quite amusing how similar the both of you are:

adrian_r34 joined 24/04/2009

Jess R33 joined 20/04/2009

Jess R33 has an Apexi Power FC with HC to sell….from her Series 1 R33 which was recently “EPA’d”

http://www.skylinesaustralia.com/forums/Po...96#entry4545796

and so do you from your recently “upgraded” Series 1 R33 to a 34gtt

http://www.skylinesaustralia.com/forums/Pa...17#entry4553917

Jess R33 was also speaking of selling her standard r33 gtst series 1 driver’s seat in the same post

http://www.skylinesaustralia.com/forums/Po...96#entry4545796

and you….well…. you were quite interested in seats too….

http://www.skylinesaustralia.com/forums/Se...52#entry4554152

BUT the part that seals the deal for me is that the two of you have the same IP address…..

So….I think you need to have a little think, speak to your housemate (who you posted also has a R33)…..and let me know what you want to do…via post or PM…

What I would like is my $1200 back ASAP.

I will be contacting the police as well as DOCEP (Department of Consumer Protection) if you don’t get back to me.

Peter

Granthem Mentor

Granthem

Posted
Posted

I live in Rockhampton Mate. If you get in contact with her, be sure to get an address. Tell her not to bother posting and I will go pick it up for you.

Good luck anyway! There are a few burgundy R33s in town, but none I know are owned by a Jess that I know of.

KaiShin Enthusiast

KaiShin

Posted
Posted

Hey Guys,

Just gunna wade into this issue here..

FYI..

If you provide the bank account details to the police they will subsequently issue the bank with a legal request order for the owners personal information and either pop in to have a chat or give the owner a call.

They usually do this fairly quickly as it doesnt take long to request the info then make a phone call.

This is my housemates profile and he and I both work in banking.

For what its worth between the IP information and the bank account details tracking them down would be very simple.

Hopefully they are reading this thread and will pull there head out there bums.. hopefully there is a legitimate reason behind the delay.. which does happen.

Good luck with the search.

Contact me if you want any banking specific direction to deal with the money part of it. Your institution may be able to put a fraud request/claim through to the other bank.

Cheers,

T

Peter Community Regular

Peter

Posted
  • Author
Posted

Hey Guys,

Thanks for the support and advice - I'm having it looked into at the moment - so I'll let you know how it goes when it's resolved.

Cheers,

Peter

  • 1 month later...
psi Experienced

psi

Posted
Posted

This smells fishy to me..

If you do get to the bottom of this stuff, and it isnt a misunderstanding,

I think that the mods should ban this user/users, I know a few people in Rocky, I will be informing them of this scammer..

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      You Gregged a whole racetrack!?
    • GTSBoy
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By GTSBoy · Posted

      Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Bireley_32
      R32 GT-R: 4WD Light Turns On After Bumps – Code 19 (ETS Motor) But No Issues Found

      By Bireley_32 · Posted

      Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...