Jump to content
SAU Community

Recommended Posts

Hi Everyone,

I was wondering if you could help me out please.

Recently I transferred money (22/04/2009) to Jess R33 for a PFC and HC post link is:

http://www.skylinesaustralia.com/forums/Po...55#entry4564955

After many PMs back and forth, with the last being Friday evening (24/04/2009) she said that she would post it Saturday.....

Since that PM I haven't heard from her despite sending her several PMs as well as posting twice on the thread.

I am worried that I have lost my money....and not really sure what to do

All I know, besides her bank details, which I won’t put on this thread are:

Name: Jessica

Lives in Rockhampton

Drives a maroon R33

Also selling an Apexi AVCR on a different thread....

Does anyone on this forum or who lives in Rockhampton know her? Can anyone offer any suggestions or help me please?

I really do hope that this is just a misunderstanding and a PM appears tomorrow (or better the PFC arrives) but I am losing hope.....

Thanks,

Peter

Thanks for the support and advice guys. Apologies for the link, this one should work....

http://www.skylinesaustralia.com/forums/Po...65#entry4566665

6TR, yeah I'll give it another seven days then contact the police....thanks for the offer axe_s - unfortunately I don't know her address...

Stll hoping for a PM or parcel from her....

Forever optimistic!

Pete

Just a FYI....

Hi adrian_r34 or should I say Jess R33,

It’s quite amusing how similar the both of you are:

adrian_r34 joined 24/04/2009

Jess R33 joined 20/04/2009

Jess R33 has an Apexi Power FC with HC to sell….from her Series 1 R33 which was recently “EPA’d”

http://www.skylinesaustralia.com/forums/Po...96#entry4545796

and so do you from your recently “upgraded” Series 1 R33 to a 34gtt

http://www.skylinesaustralia.com/forums/Pa...17#entry4553917

Jess R33 was also speaking of selling her standard r33 gtst series 1 driver’s seat in the same post

http://www.skylinesaustralia.com/forums/Po...96#entry4545796

and you….well…. you were quite interested in seats too….

http://www.skylinesaustralia.com/forums/Se...52#entry4554152

BUT the part that seals the deal for me is that the two of you have the same IP address…..

So….I think you need to have a little think, speak to your housemate (who you posted also has a R33)…..and let me know what you want to do…via post or PM…

What I would like is my $1200 back ASAP.

I will be contacting the police as well as DOCEP (Department of Consumer Protection) if you don’t get back to me.

Peter

I live in Rockhampton Mate. If you get in contact with her, be sure to get an address. Tell her not to bother posting and I will go pick it up for you.

Good luck anyway! There are a few burgundy R33s in town, but none I know are owned by a Jess that I know of.

Hey Guys,

Just gunna wade into this issue here..

FYI..

If you provide the bank account details to the police they will subsequently issue the bank with a legal request order for the owners personal information and either pop in to have a chat or give the owner a call.

They usually do this fairly quickly as it doesnt take long to request the info then make a phone call.

This is my housemates profile and he and I both work in banking.

For what its worth between the IP information and the bank account details tracking them down would be very simple.

Hopefully they are reading this thread and will pull there head out there bums.. hopefully there is a legitimate reason behind the delay.. which does happen.

Good luck with the search.

Contact me if you want any banking specific direction to deal with the money part of it. Your institution may be able to put a fraud request/claim through to the other bank.

Cheers,

T

Hey Guys,

Thanks for the support and advice - I'm having it looked into at the moment - so I'll let you know how it goes when it's resolved.

Cheers,

Peter

  • 1 month later...

This smells fishy to me..

If you do get to the bottom of this stuff, and it isnt a misunderstanding,

I think that the mods should ban this user/users, I know a few people in Rocky, I will be informing them of this scammer..



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...