Jump to content
SAU Community

Paid Of 5 X 114.3 20mm Spacers

konect
 Share

Recommended Posts

konect Mentor

konect

Posted
Posted (edited)

Hey all,

Got some spacers off my ceffy that I no longer require.

They are a pair of 5 x 114.3 20mm spacers and are a dark blue colour.

Nothing crazy but $70 for the pair :)

I can be contacted via PM or 0412 033 449, parts are located in St Kilda East.

Thanks.

Edited by konect
Link to comment
https://www.sau.com.au/forums/topic/267910-paid-of-5-x-1143-20mm-spacers/
Share on other sites
Zurlox Collaborator

Zurlox

Posted
Posted
Hey all,

Got some spacers off my ceffy that I no longer require.

They are a pair of 5 x 114.3 20mm spacers and are a dark blue colour.

Nothing crazy but $70 for the pair :)

I can be contacted via PM or 0412 033 449, parts are located in St Kilda East.

Thanks.

would these fit on my r32gtst?

thanks,

sam

Mick Mentor

Mick

Posted
Posted

may i ask if you would need longer studs put in, bec i put 8mm spacers to clear the brakes on the front on my 19's and there didnt look like there was much stud to get the nuts on ..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...