Chipped Ecu Issue.... Help!

[vr4ust]

Hey there i just got my standard ecu chipped (R32 gtst rb20det) it was a standard auto computer and seemed to go sweet in my manual except for detonation at 10psi when boosting, anyway i plugged the ecu in and at first was pretty hard to start but started and the exhaust temp light was flashing and so was the red light in the ecu, and if you slowly put your foot on the accl it revs up but if you put your foot down it almost stalls and runs like a bag of puss, any help would be greatly appreciated!!!

[vr4ust]

ok been playin with the aac valve and the fine tuning thing in the ecu but that doesnt seem to be doin much anyway the damn exhaust\gas light keeps flashingwhat the hell? i never seen it flash before i tried reseting the ecu but doesnt do squat and the search function on this site is crap so does someone have any idea?

[CEF11E]

your ecu is not reading the eprom properly.

did you put a new eprom in the ecu or did you get an already chipped ecu?

[CEF11E]

it sounds like you have put a cradle in your ecu and installed a remap. either 3 possible causes

1. the remap is not programmed correctly on the eprom

2. the eprom is not sitting in the socket correclty

3. the ecu has been damager installing the soket or eprom..the tracks are fairly fragile on these ecus and break easily. where did you get the remap and was it done to suit your mods?

[vr4ust]

ahh dam dont tell me that..... i got it made to suit the car just got it back it was sent fully bubble wrapped and returned the same. So its not reading the eprom? it was done by remap.co.nz supposed to be pretty good but he wont pick up his effin phone

[Tangles]

ahh dam dont tell me that..... i got it made to suit the car just got it back it was sent fully bubble wrapped and returned the same. So its not reading the eprom? it was done by remap.co.nz supposed to be pretty good but he wont pick up his effin phone

mine was done mail order too. Toshi

went to the dyno straight away and tuned the SAFC around a bit, made a vast difference in the end

[CEF11E]

by the sounds of it he did not test it before sending it back. send it back right away it needs to be fixed.

[vr4ust]

yea i was reling on it so i could drive my car home tomorrow, so i flew in today now i gotta pay for a flight home awesome yay

[OnAhigh]

i just got a remap other week aswell and ive started getting the flashing light aswell. red light first bottom from the left?

[R33NZSL33PA]

i hope u guys who got ya ecu's remapped got them tuned on a dyno and replaced ur oxyengen sensors etc be43 dyno

[OnAhigh]

i havent yet but will be. can they tune a remapped ecu? i thought they could only tune a aftermarket computer?

[SiR_RB]

can for example, a "mines" tuned ecu be changed in any way on the dyno or are they locked?