Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

are you guys busy tomorrow? Need some heat applied to a front/dump pipe on the stagea as it lightly taps the floor and bend it a tiny bit... Could all be done on the car its just i dont have enough heat to do it myself :D

MOVING 30 SECONDS DOWN RD TO NEW SHED!!! RAN OUT OF ROOM ALREADY

NEW ADDRESS IS 2/60 STANBEL RD DIRECTLY ACROSS THE RD FROM PRO FITNESS IN PURPLE BUILDING. WE WILL STILL BE AT U3/26 STANBEL RD TILL SAT AND THEN BY MONDAY WE WILL BE COMPLETELY MOVED IN TO OUR BIGGER AND BETTER ALARMED SHED, U2/60 STANBEL RD

THANKS

Edited by SLY-L20
we dont currently have oxy to heat it but i can remake that section cheap for you!

It only needs to be bent down like 5mm at the most in one spot dont think it would be worth re-making... what would you do just cut it and weld anothe peice in their at a diff angle or something?

Its on the under side so it would need to be pulled off.

If unbolted the cat back and pulled the dump down slighlty and it bends it enough to stop it from tapping for a day or so but then it just goes back to its normal position after a day or so... :P

Ideas apart from heating it and bending it? I can get access to an oxy set on sat. which looks like the best thing to do atm but I do however have tomorrow off work and coud take it somewhere.

Its on the under side so it would need to be pulled off.

If unbolted the cat back and pulled the dump down slighlty and it bends it enough to stop it from tapping for a day or so but then it just goes back to its normal position after a day or so... :ninja:

Ideas apart from heating it and bending it? I can get access to an oxy set on sat. which looks like the best thing to do atm but I do however have tomorrow off work and coud take it somewhere.

Just take it to Exhaust tech or somewhere like that :P

hey guys no offense but this is a thread for our business opening not to discuss where ELSE you can take your car for a quick fix haha

Thanks guys

I am here now if you want me to have a look at it for you! Im sure we can work something out!

Simon

  • 2 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
×
×
  • Create New...