Jump to content
SAU Community

Recommended Posts

Depends how good you are at driving, and if straight line 1/4 mile speed quick, if you have the balls to drop the clutch at 7000rpm.....

But they are pretty damn quick if its in good condition, but there seems to be more and more used and abused 32 GTR's going around, that are to put it politely, in shit condition and let down the GTR name.

Link to comment
https://www.sau.com.au/forums/topic/26862-r32-gtrs/#findComment-566677
Share on other sites

compression and leakdown test will indicate if its in need of an engine rebuild (or at least replacement of piston rings, which still means ripping the engine apart)

Keep in mind the cars are upto 15 years old... They are excellent cars, and you pay more for the ones in decent condition, but theyre not some sort of "supercar", and after 15 years of life, they are starting to show their age.

Link to comment
https://www.sau.com.au/forums/topic/26862-r32-gtrs/#findComment-566688
Share on other sites

I would think that a recentable to very good condition R32GTR will cost around $30-$40k, I have seen many shit R32GTR around 25k and they are shit, 98-92 early model, engine, electrical, problem and it will cost u around $6-7k to replace the engine anyway. so why don't just buy a $30k good condition GTR? If u lucky enough, maybe u can find a 93-94 later model

Link to comment
https://www.sau.com.au/forums/topic/26862-r32-gtrs/#findComment-570463
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
    • I'm interested,do you still have it?
×
×
  • Create New...