Jump to content
SAU Community

R32gtr Parts Up For Grabs

huli
 Share

Recommended Posts

huli Experienced

huli

Posted
Posted

Hey guys the last of my RB26 is going cheap!!! PRICES BELOW DO NOT INCLUDE POSTAGE AND HANDLING, SO SEND US A PM IF INTERESTED AND A TOTAL PRICE CAN BE ORGANISED!!!

th_rb26parts059.jpgHARMONIC BALANCER/ CRANK PULLEY $50th_rb26parts058.jpgth_rb26parts056.jpgINTAKE MANIFOLD $50th_rb26parts033.jpgTURBO CONNECTING PIPE(TWIN SETUP) $40th_rb26parts028.jpgS1 R33 CENTRE GRILL(2PAK GREY) $80th_rb26parts007.jpgR32 GTR ECU $60th_rb26parts027.jpgS1 FRONT BAR (N1 REPLICA $200)READY TO WET RUB AND PAINT!!!th_rb26parts013.jpg STOCK 32GTR TURBOS(NO WHEEL PLAY/DONT LEAK OR BLOW SMOKE) $150 EACHth_rb26parts014.jpg

Link to comment
https://www.sau.com.au/forums/topic/270101-r32gtr-parts-up-for-grabs/
Share on other sites
huli Experienced

huli

Posted
  • Author
Posted

BLEVIT - the front bar is a replica so the N1 slots are actually apart of the bar itself

NSN180 - No worries mate, hopefully you will put them to good use!!

harmonic balancer/crank pulley SOLD

intake plenum SOLD

R32 GTR ECU SOLD

huli Experienced

huli

Posted
  • Author
Posted
do the turbos come as in the pictures or will they be stripped?

also what are these equivalent to T3/T25?

The turbos come as they are in the pictures,but are missing the intake pipes as they were sold not to long ago!

Everything else is still assembled( exhaust manifolds,turbos,dump pipes,heat shields,O2 sensors etc)

The turbos are the equivalent to T3/T25 turbos and will fit any stock nissan manifold, with the exception of the exhaust needing some mods if it goes into say a EXA,180,R33GTSt etc.

Any more queries to the remaining parts send us a pm or call 0400262578

huli Experienced

huli

Posted
  • Author
Posted (edited)

New combo package for the R33 front bar and centre grill $200 for both!!

Also still up for grabs the connecting pipe for twin turbo and the two turbos themselves( not disassembled)!

anyone requiring these, send us a pm..

Edited by huli

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Any idea where I can get genuine MAF apart from used ones? I can't find any only for GTRs and unfortunately that price is not in my budget 🤣 I might gap my plugs down and put my splitfires in, they were only in for a year or so before I started the rebuild 
×
×
  • Create New...