Jump to content
SAU Community

Recommended Posts

question has probably been asked before but im new at this so a little help would be great. GTR cooler is black and i want it silver. whats the best way to achieve this. Paint stripper or do i paint it in a silver/ chrome paint. Some ideas would be appreciated thanks...

hey mate,

see if you can pick up a R34 GTR cooler, thats what i did when i wanted it silver, its not really silver, its just unpainted.

the only difference is that you have to get the sensor hole welded, but that only cost me $20-$40 i think?

looks heaps better, doesnt stand out too much, but its noticeable enough.

good luck mate

i paint stripped one once. it kinda worked out ok but needed lots of polishing

Thanks for the replies guys. I hit it with paint stripper in a can and it came up pretty good i think. It looks alot better then when it was black. Got some metal polisher onto it just to give it a clean look. I tooks some pics on my phone and it was late in the arvo so apologize for the crap quality pics.

post-57857-1243140029_thumb.jpg

post-57857-1243140054_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...