Jump to content
SAU Community

Recommended Posts

Item: r32 89 gtr

Location: taree

Item Condition: tidy

Reason for Selling: time to move on to some thing else... maybe build some thing else....

Price and Payment Conditions: 20000 not a cent less or ill just keep her!

Extra Info: r32 gtr 1989 model

rebuilt motor about 10000kms ago

cp pistions rings

acl race series bearings

rev light weight rods

acl race series metal head gasket inlet gaskets

ported poished head matched manifolds

jun bronze valve guides

stainless steel valves

shaved head block ect

fully balanced bottom end crank etc

all new gaskets

new Garrett GT2860R5S 360Hp ball bearing turbos

new radiator

all new rubber hoses

Greddy hard pipe intercooler kit

K&N pod air filters

Sard 720cc injectors

Sard in-tank fuel pump

Re-wired fuel pump

Turbo Smart fuel pressure reg

Jun oil pump

Jun oil pump crank collar

Cam plate covers

Baffled sump

Oil restrictors in the block

Power FC computer with hand controller

E-boost 2

full 3 inch exhaust

Buzz adjustable suspension

Lowered springs

4wd/2wd switch (to make it into rear wheel drive or 4wd without getting out of car)

OS Geiken twin plate clutch

Lightened flywheel

336rwkw on 17 psi 455hp

car has ran a 12.0 181kmh on old stock turbos easy mid 11s car as is...

there would be more i have not thought of.....

no one will drive it until i see a deposit no time wasters!

also comes with 2 brand new 245s semi slicks have not been fitted...

gates race series timming belt new water pump just been serviced to all new fuilds box diff brakes every thing!

its still running a little rich atm 11s afr so its a safe tune! will go 500 at the wheels with a tune up and a bit more boost, makes 455hp on 17 18 psi

also new brake pads and skimmed the front disks new abs unit, pulls up as hard as it goes

pm me

post-42837-1242868370_thumb.jpg

post-42837-1242868391_thumb.jpg

post-42837-1242868412_thumb.jpg

post-42837-1242868429_thumb.jpg

post-42837-1242868445_thumb.jpg

post-42837-1242868462_thumb.jpg

post-42837-1242868494_thumb.jpg

post-42837-1242868516_thumb.jpg

post-42837-1242868530_thumb.jpg

post-42837-1242868546_thumb.jpg

post-42837-1242868564_thumb.jpg

post-42837-1242868575_thumb.jpg

post-42837-1242868587_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/271022-r32-gtr-455rwhp/
Share on other sites

Item: r32 89 gtr

Location: taree

Item Condition: tidy

Reason for Selling: time to move on to some thing else... maybe build some thing else....

Price and Payment Conditions: 20000 not a cent less or ill just keep her!

Can you give me a little more info on the 'Tidy' How is body, interior, tyres, paint (any dents/scraps) that sort of thing. Scouring the East Coast for a pearler of a 32 thats had the engine built internally. Much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/271022-r32-gtr-455rwhp/#findComment-4610946
Share on other sites

paint is very good few little mark here and there odd tiny dint as you would expect for a 20 year old car..

alot cleaner than most of the ones i looked at when i bought it.

front tyres are cheap ones but 90% i will fit the semi slicks brand new 245s on the rear when i have a buyer rears are worn out done 30 000kms

scratches on front lip and rear bar is fading on a spot was quoted 400 to respray both bars and front lip

so thats why the price is 20 not 25 in side is very clean no rips or tears seat covers all ways on the front

and no one really ever goes in the back

Link to comment
https://www.sau.com.au/forums/topic/271022-r32-gtr-455rwhp/#findComment-4613755
Share on other sites

Guest Solman

hey got a few questions,

who rebuilt the motor for you, do you have receipts for this?

when you say "cp pistions rings", does this mean Cp pistons and CP rings, or just the rings? sorry just little confused about this.

the new radiator is it a standard R32 GTR one or after market.

How is the gearbox and diffs have they been serviced lately?

sorry about all the questions mate, i am really keen on a GTR and i am looking at getting one with a rebuilt/forged motor like yours.

thanks again

Edited by Solman
Link to comment
https://www.sau.com.au/forums/topic/271022-r32-gtr-455rwhp/#findComment-4620383
Share on other sites

hey got a few questions,

who rebuilt the motor for you, do you have receipts for this?

when you say "cp pistions rings", does this mean Cp pistons and CP rings, or just the rings? sorry just little confused about this.

the new radiator is it a standard R32 GTR one or after market.

How is the gearbox and diffs have they been serviced lately?

sorry about all the questions mate, i am really keen on a GTR and i am looking at getting one with a rebuilt/forged motor like yours.

thanks again

no worrys mate gpm local work shop all papers for the build, engine in out, turbos the lot all brand new parts!!! lots and lots of money spent on it!!!!

yes cp pistions and rings!

its a brand new stock radiator 500 bucks never gets hot but put a new one in any way to be safe and all new rubber hoses 550 bucks worth

gear box is fine diff has a slight wind has never got any worse.... both oils have been changed engine oil filter gets done every 3000km! and clean air filters

questions are fine mate any more just ask only reason i am selling is to build some thing differnt time for a change will be a VERY sad day tho if she dose sell :D

Link to comment
https://www.sau.com.au/forums/topic/271022-r32-gtr-455rwhp/#findComment-4622877
Share on other sites

really thought there would be more interest? :) i know you never get your money back but there could be over 20g spent on this!

i have my new project now so im ready to let her go

Link to comment
https://www.sau.com.au/forums/topic/271022-r32-gtr-455rwhp/#findComment-4626376
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...