Jump to content
SAU Community

Garage Cleanout - Gtst Sii

stealth
 Share

Recommended Posts

stealth Enthusiast

stealth

Posted
Posted

1. RB25DET head and manafold $750

2. Std Nissan fly wheel, pressure plate and clutch plate $600

3. Head covers and bottom cover $400

4. Cam pully $60 (looks in good condition)

5. Std exhaust manifold heat shield $15

6. Std Nissan fuel rail and injectors $150 (Could get these "hi flowed" to get the larger reliable capacity)

7. Std Nissan throttle valve $80

8. Cam covers $60

9. Std Nissan RB25DET Turbo including dump pipe and oil connection pipe $380 (taken of stock at 70,000km)

10. Turbosmart Plumback BOV $300

11. Cam timer $50

12. Front pipe to turbo $60

13. R33 Standard BOV and gasket $50

14. R33 crossover pipe including HKS silicon connection pipe $80

15. Race Pipe - custom $350 (Used on track days. Just dropped the std exhaust and connected this baby straight on where the catalytic converter connects and it exhausts out to the side. Sounds brilliant)

16. Original Nissan air intake to air filter box $25

17. R32 crossover pipe (will fit R33) $25

18. Original automatic radio antenna $20

19. Original Nissan air intake to turbo piping 2x @ $25 each

20. Nissan 2500 coil cover 2x @ $25 each

21. Bride" racing seat. Fits straight into R33 $450 (Harness not included. Has wear mark otherwise excellent)

22. Turbo manifold gasket $15

23. Original Nissan coils and coild brackets 6x for $80 (replaced with spitfires)

24. Potenza RE540S - 225/50R16 on AVS Alloy mag wheels 16". Pearl white colour $450 (1 tyre blew out. Other 3 good for a couple more track runs. Great track tyres. Mags - Very good condition. No chips or cracks. Light weight compared to std wheels look good on car)

25. Silverstone" S-585 - 235/45R17 track tyres 2x @ $50 each (not a lot of tread for street but would still do a couple of track runs)

26. Advan" 255/40 Z R17 4x @50 each (Good track tyres. Still good for a couple of track days)

27. 300ZX original alloy wheel $25 (good condition. No cracks or major scrapes)

28. Brake pads BMXP - front wheels (Std brake pads, plenty of meat left. Use them to replace the noise track pads when on the street)

Have photos on request. Please PM for any further deatils (notecan only chk PMs at night)

Located Brisbane - Morningside

Link to comment
https://www.sau.com.au/forums/topic/271489-garage-cleanout-gtst-sii/
Share on other sites
stealth Enthusiast

stealth

Posted
  • Author
Posted

1. RB25DET head and manafold $750

2. Std Nissan fly wheel, pressure plate and clutch plate $600

3. Head covers and bottom cover $400

4. Cam pully $60 (looks in good condition)

5. Std exhaust manifold heat shield $15 SOLD

6. Std Nissan fuel rail and injectors $150 (Could get these "hi flowed" to get the larger reliable capacity)

7. Std Nissan throttle valve $80

8. Cam covers $60 SOLD

9. Std Nissan RB25DET Turbo including dump pipe and oil connection pipe $380 (taken of stock at 70,000km)

10. Turbosmart Plumback BOV $300

11. Cam timer $50

12. Front pipe to turbo $60

13. R33 Standard BOV and gasket $50

14. R33 crossover pipe including HKS silicon connection pipe $80

15. Race Pipe - custom $350 (Used on track days. Just dropped the std exhaust and connected this baby straight on where the catalytic converter connects and it exhausts out to the side. Sounds brilliant)

16. Original Nissan air intake to air filter box $25

17. R32 crossover pipe (will fit R33) $25 SOLD

18. Original automatic radio antenna $20

19. Original Nissan air intake to turbo piping 2x @ $25 each

20. Nissan 2500 coil cover 2x @ $25 each 1x SOLD

21. "Bride" racing seat. Fits straight into R33 $450 (Harness not included. Has wear mark otherwise excellent)

22. Turbo manifold gasket $15

23. Original Nissan coils and coild brackets 6x for $80 (replaced with spitfires)

24. Potenza RE540S - 225/50R16 on AVS Alloy mag wheels 16". Pearl white colour $450 (1 tyre blew out. Other 3 good for a couple more track runs. Great track tyres. Mags - Very good condition. No chips or cracks. Light weight compared to std wheels look good on car)

25. Silverstone" S-585 - 235/45R17 track tyres 2x @ $50 each (not a lot of tread for street but would still do a couple of track runs)

26. Advan" 255/40 Z R17 4x @50 each (Good track tyres. Still good for a couple of track days)

27. 300ZX original alloy wheel $25 (good condition. No cracks or major scrapes)

28. Brake pads BMXP - front wheels (Std brake pads, plenty of meat left. Use them to replace the noise track pads

post-9127-1243672751_thumb.jpg

post-9127-1243672804_thumb.jpg

post-9127-1243672909_thumb.jpg

post-9127-1243673062_thumb.jpg

post-9127-1243673189_thumb.jpg

post-9127-1243673277_thumb.jpg

post-9127-1243673567_thumb.jpg

post-9127-1243674607_thumb.jpg

post-9127-1243674681_thumb.jpg

post-9127-1243674969_thumb.jpg

post-9127-1243675131_thumb.jpg

post-9127-1243675225_thumb.jpg

post-9127-1243675580_thumb.jpg

post-9127-1243675718_thumb.jpg

post-9127-1243675819_thumb.jpg

post-9127-1243675953_thumb.jpg

maniekan Collaborator

maniekan

Posted
Posted

hey bud yeah im still interested in the turbo just curious is yours the nylon compressor wheel i heard on another forum that the later model series two turbos are basically R34 replacement turbo's which have the nylon compressor wheel better for heat dissipation

Im on the gold coast, just give me a call and we can discuss further 0404803660 thanks man my names Chris

stealth Enthusiast

stealth

Posted
  • Author
Posted
hey bud yeah im still interested in the turbo just curious is yours the nylon compressor wheel i heard on another forum that the later model series two turbos are basically R34 replacement turbo's which have the nylon compressor wheel better for heat dissipation

Im on the gold coast, just give me a call and we can discuss further 0404803660 thanks man my names Chris

Hi Chris

Can you tell by looking at the compressor wheel?

It was taken off a very clean Series II engine.

I'll attach a photo if this helps.

Maybe I can meet you half way on the coast on weekend to deliver?

Cheers

Dave

post-9127-1244023888_thumb.jpg

post-9127-1244024055_thumb.jpg

post-9127-1244024132_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Like I said, "black magic" LOL In the end,  it is what it is, and hopefully, what this here knuckle head has done is an improvement and not a hindrance Not that I actually notice any negatives now, or that I will get any seat of the pants benefits when all is said and done, but best practice says I shouldn't be pulling intake air from the hot engine bay  Famous last words: I cannot see it being any worse than what it is at the moment 🤔
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      If the gases flowing in those two tracts had the same properties, you could maybe use such broscience. But the exhaust has a different composition, different normal density, different actual density (because of different normal density, and mostly because of the massively higher temperature), and different viscosity (again because of much higher temperature). Consequently, all of the fluid dynamics parameters that matter, that you calculate from these inputs, such as the Reynolds number, friction factors (for wall friction) and so on, are all incomparable.
    • GTSBoy
      Ethanol Content Sensor - Always at 11%?

      By GTSBoy · Posted

      And we shall have to presume that Canada is the same?
    • joshuaho96
      Ethanol Content Sensor - Always at 11%?

      By joshuaho96 · Posted

      In the US almost everything is E10. It can't exceed 10% by much or fuel systems have trouble adapting. At the same time because MTBE, MMT, and TEL are all banned they need as much ethanol in it as possible to boost octane.
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I was mostly jesting. In my experience (and probably only my experience) the R34 GTT physical airbox space is actually too small to flow the amount of power it wanted. By sealing the box, I made it so it could only be fed by the ducts themselves. So you can seal it up and get nice cold air which IS good, but at a certain crossover point: More Hot Air > Less Cold Air I don't think you're at this point. In my case merely ducting the hot air intake with a very focused set of ducts counteracts the fact it's in a V8 engine bay. More cold air obviously best. The solution looks great.
×
×
  • Create New...