Jump to content
SAU Community

Recommended Posts

1. RB25DET head and manafold $750

2. Std Nissan fly wheel, pressure plate and clutch plate $600

3. Head covers and bottom cover $400

4. Cam pully $60 (looks in good condition)

5. Std exhaust manifold heat shield $15

6. Std Nissan fuel rail and injectors $150 (Could get these "hi flowed" to get the larger reliable capacity)

7. Std Nissan throttle valve $80

8. Cam covers $60

9. Std Nissan RB25DET Turbo including dump pipe and oil connection pipe $380 (taken of stock at 70,000km)

10. Turbosmart Plumback BOV $300

11. Cam timer $50

12. Front pipe to turbo $60

13. R33 Standard BOV and gasket $50

14. R33 crossover pipe including HKS silicon connection pipe $80

15. Race Pipe - custom $350 (Used on track days. Just dropped the std exhaust and connected this baby straight on where the catalytic converter connects and it exhausts out to the side. Sounds brilliant)

16. Original Nissan air intake to air filter box $25

17. R32 crossover pipe (will fit R33) $25

18. Original automatic radio antenna $20

19. Original Nissan air intake to turbo piping 2x @ $25 each

20. Nissan 2500 coil cover 2x @ $25 each

21. Bride" racing seat. Fits straight into R33 $450 (Harness not included. Has wear mark otherwise excellent)

22. Turbo manifold gasket $15

23. Original Nissan coils and coild brackets 6x for $80 (replaced with spitfires)

24. Potenza RE540S - 225/50R16 on AVS Alloy mag wheels 16". Pearl white colour $450 (1 tyre blew out. Other 3 good for a couple more track runs. Great track tyres. Mags - Very good condition. No chips or cracks. Light weight compared to std wheels look good on car)

25. Silverstone" S-585 - 235/45R17 track tyres 2x @ $50 each (not a lot of tread for street but would still do a couple of track runs)

26. Advan" 255/40 Z R17 4x @50 each (Good track tyres. Still good for a couple of track days)

27. 300ZX original alloy wheel $25 (good condition. No cracks or major scrapes)

28. Brake pads BMXP - front wheels (Std brake pads, plenty of meat left. Use them to replace the noise track pads when on the street)

Have photos on request. Please PM for any further deatils (notecan only chk PMs at night)

Located Brisbane - Morningside

Link to comment
https://www.sau.com.au/forums/topic/271489-garage-cleanout-gtst-sii/
Share on other sites

1. RB25DET head and manafold $750

2. Std Nissan fly wheel, pressure plate and clutch plate $600

3. Head covers and bottom cover $400

4. Cam pully $60 (looks in good condition)

5. Std exhaust manifold heat shield $15 SOLD

6. Std Nissan fuel rail and injectors $150 (Could get these "hi flowed" to get the larger reliable capacity)

7. Std Nissan throttle valve $80

8. Cam covers $60 SOLD

9. Std Nissan RB25DET Turbo including dump pipe and oil connection pipe $380 (taken of stock at 70,000km)

10. Turbosmart Plumback BOV $300

11. Cam timer $50

12. Front pipe to turbo $60

13. R33 Standard BOV and gasket $50

14. R33 crossover pipe including HKS silicon connection pipe $80

15. Race Pipe - custom $350 (Used on track days. Just dropped the std exhaust and connected this baby straight on where the catalytic converter connects and it exhausts out to the side. Sounds brilliant)

16. Original Nissan air intake to air filter box $25

17. R32 crossover pipe (will fit R33) $25 SOLD

18. Original automatic radio antenna $20

19. Original Nissan air intake to turbo piping 2x @ $25 each

20. Nissan 2500 coil cover 2x @ $25 each 1x SOLD

21. "Bride" racing seat. Fits straight into R33 $450 (Harness not included. Has wear mark otherwise excellent)

22. Turbo manifold gasket $15

23. Original Nissan coils and coild brackets 6x for $80 (replaced with spitfires)

24. Potenza RE540S - 225/50R16 on AVS Alloy mag wheels 16". Pearl white colour $450 (1 tyre blew out. Other 3 good for a couple more track runs. Great track tyres. Mags - Very good condition. No chips or cracks. Light weight compared to std wheels look good on car)

25. Silverstone" S-585 - 235/45R17 track tyres 2x @ $50 each (not a lot of tread for street but would still do a couple of track runs)

26. Advan" 255/40 Z R17 4x @50 each (Good track tyres. Still good for a couple of track days)

27. 300ZX original alloy wheel $25 (good condition. No cracks or major scrapes)

28. Brake pads BMXP - front wheels (Std brake pads, plenty of meat left. Use them to replace the noise track pads

post-9127-1243672751_thumb.jpg

post-9127-1243672804_thumb.jpg

post-9127-1243672909_thumb.jpg

post-9127-1243673062_thumb.jpg

post-9127-1243673189_thumb.jpg

post-9127-1243673277_thumb.jpg

post-9127-1243673567_thumb.jpg

post-9127-1243674607_thumb.jpg

post-9127-1243674681_thumb.jpg

post-9127-1243674969_thumb.jpg

post-9127-1243675131_thumb.jpg

post-9127-1243675225_thumb.jpg

post-9127-1243675580_thumb.jpg

post-9127-1243675718_thumb.jpg

post-9127-1243675819_thumb.jpg

post-9127-1243675953_thumb.jpg

hey bud yeah im still interested in the turbo just curious is yours the nylon compressor wheel i heard on another forum that the later model series two turbos are basically R34 replacement turbo's which have the nylon compressor wheel better for heat dissipation

Im on the gold coast, just give me a call and we can discuss further 0404803660 thanks man my names Chris

hey bud yeah im still interested in the turbo just curious is yours the nylon compressor wheel i heard on another forum that the later model series two turbos are basically R34 replacement turbo's which have the nylon compressor wheel better for heat dissipation

Im on the gold coast, just give me a call and we can discuss further 0404803660 thanks man my names Chris

Hi Chris

Can you tell by looking at the compressor wheel?

It was taken off a very clean Series II engine.

I'll attach a photo if this helps.

Maybe I can meet you half way on the coast on weekend to deliver?

Cheers

Dave

post-9127-1244023888_thumb.jpg

post-9127-1244024055_thumb.jpg

post-9127-1244024132_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
    • But they do so for the other reasons to have a compressor bypass. It's in the name.
×
×
  • Create New...