Jump to content
SAU Community

Recommended Posts

Hey guys,

All parts are located in Westmead (Sydney's West) all parts are used unless specified. Pick up is prefered but I can arrange freight at your cost.

R33 GTST related:

R33 GTST Ntk o2 sensor, brand new $77 delivered..

Sydneykid Bilstein R33 GTST suspension set up ready to go F+R. Used for 5000-8,000kms paid $1600 Sell $1000ono

S1 front head lights, with eyelids and are in good condition. $400 pair

S1 bonnet, few dents and will need a spray. $100

Front Fenders L+R $250 pair (midnight purple)

Drivers front fender $125. (gun metal grey)

S2 Drivers Airbag $200. please note it is only the airbag not the steering wheel.

R33 S2 interior carpet $80 in top condition not tears etc.

R33 GTR related:

Greddy oil cooler with braided lines $700 came off a R33 S3 used for unknown kms.

EMS Stinger 4424 with loom attachement and PC cable. Came with my GTR but have replaced with a Haltech.. $800

http://www.enginemanagement.com.au/product...products_id=107

Other stuff:

V35 steering wheel in good condition, no airbag $200

Genuine Bosch 1 x 040 or 2 x 044 $220 each delivered

Haltech E11V2 brand new, $1450 with a generic harness or $1500 with a plug n play patch loom.

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

Pm me with your email address as the pics take way too long up upload here.

No low ball offers please & dont waste my time, If your cousin can get them cheaper go buy them off him.

Cheers,

Johno

Hey guys,

R33 GTST related:

...

S1 front head lights, with eyelids and are in good condition. $400 pair

Drivers front fender $125. (gun metal grey)

...

Cheers,

Johno

Can i get pics of the headlights and the gunmetal quarterpanel?

Could you please Pm me with your email addresses. Pics take way to long to load up here.

Cooler mounts behind the BOV's (passangers side) on a GTR. No thermo or relocator sorry.

Cheers,

Johno

headlights sold..

Bilstiens back up for sale, buyer fell through.. items will not be held, first with cash gets it.

Cheers,

Johno

Items SOLDHeadlights SOLD

Bilstiens SOLD

S2 Drivers Airbag SOLD

Prices dropped

S1 bonnet - $80

R33 GTST Ntk o2 sensor - $77 delivered

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $700

Genuine Bosch 1 x 040 or 2 x 044 $210 each delivered

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $100 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

More stuff to come.

Prices dropped

S1 bonnet - $80

R33 GTST Ntk o2 sensor - $70 delivered

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $600

Genuine Bosch 1 x 040 or 1 x 044 $210 each delivered

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $100 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $600

Genuine Bosch 1 x 040 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

EMS Stinger 4424 $500

Genuine Bosch 1 x 044 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

few price drops..

Hey mate do you still have the ems stinger forsale?

hey mate

yeah its still for sale... if you like give me a call on 0401466244

cheers

johno

Sorry mate, only selling whats listed.

Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

EMS Stinger 4424 $500 EMS sold pending pick up..

Genuine Bosch 1 x 044 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

  • 2 weeks later...
Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum Sports 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...