Jump to content
SAU Community

Recommended Posts

Hey guys,

All parts are located in Westmead (Sydney's West) all parts are used unless specified. Pick up is prefered but I can arrange freight at your cost.

R33 GTST related:

R33 GTST Ntk o2 sensor, brand new $77 delivered..

Sydneykid Bilstein R33 GTST suspension set up ready to go F+R. Used for 5000-8,000kms paid $1600 Sell $1000ono

S1 front head lights, with eyelids and are in good condition. $400 pair

S1 bonnet, few dents and will need a spray. $100

Front Fenders L+R $250 pair (midnight purple)

Drivers front fender $125. (gun metal grey)

S2 Drivers Airbag $200. please note it is only the airbag not the steering wheel.

R33 S2 interior carpet $80 in top condition not tears etc.

R33 GTR related:

Greddy oil cooler with braided lines $700 came off a R33 S3 used for unknown kms.

EMS Stinger 4424 with loom attachement and PC cable. Came with my GTR but have replaced with a Haltech.. $800

http://www.enginemanagement.com.au/product...products_id=107

Other stuff:

V35 steering wheel in good condition, no airbag $200

Genuine Bosch 1 x 040 or 2 x 044 $220 each delivered

Haltech E11V2 brand new, $1450 with a generic harness or $1500 with a plug n play patch loom.

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

Pm me with your email address as the pics take way too long up upload here.

No low ball offers please & dont waste my time, If your cousin can get them cheaper go buy them off him.

Cheers,

Johno

Hey guys,

R33 GTST related:

...

S1 front head lights, with eyelids and are in good condition. $400 pair

Drivers front fender $125. (gun metal grey)

...

Cheers,

Johno

Can i get pics of the headlights and the gunmetal quarterpanel?

Could you please Pm me with your email addresses. Pics take way to long to load up here.

Cooler mounts behind the BOV's (passangers side) on a GTR. No thermo or relocator sorry.

Cheers,

Johno

headlights sold..

Bilstiens back up for sale, buyer fell through.. items will not be held, first with cash gets it.

Cheers,

Johno

Items SOLDHeadlights SOLD

Bilstiens SOLD

S2 Drivers Airbag SOLD

Prices dropped

S1 bonnet - $80

R33 GTST Ntk o2 sensor - $77 delivered

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $700

Genuine Bosch 1 x 040 or 2 x 044 $210 each delivered

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $100 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

More stuff to come.

Prices dropped

S1 bonnet - $80

R33 GTST Ntk o2 sensor - $70 delivered

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $600

Genuine Bosch 1 x 040 or 1 x 044 $210 each delivered

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $100 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

Front Fenders L+R $200 pair (midnight purple)

Drivers front fender $100 (gun metal grey)

R33 S2 interior carpet $80

Greddy oil cooler $600

EMS Stinger 4424 $600

Genuine Bosch 1 x 040 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $200

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

EMS Stinger 4424 $500

Genuine Bosch 1 x 044 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

few price drops..

Hey mate do you still have the ems stinger forsale?

hey mate

yeah its still for sale... if you like give me a call on 0401466244

cheers

johno

Sorry mate, only selling whats listed.

Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

EMS Stinger 4424 $500 EMS sold pending pick up..

Genuine Bosch 1 x 044 $210

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

  • 2 weeks later...
Front Fenders L+R $150 pair (midnight purple)

Drivers front fender $75 (gun metal grey)

R33 S2 interior carpet $50

Greddy oil cooler $600

Rays short type lug nuts 16 and 4 lock nuts 1.25 m12 Nissan, Red $180

V35 steering wheel $50 no airbag.

Haltech Platinum Sports 2000 with GTR patch loom, air temp sensor and 3 bar map $2270 (brand new)

^^^ only items left.. rest have been sold.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...