Jump to content
SAU Community

Jdm S15 Advice Please!

d4n13l

By d4n13l,
in Western Australia

 Share

Recommended Posts

mickey Proficient

mickey

Posted
Posted

$15k is about right...all depends on how desperate he is :P

Also depends what mods have been done, you mention a few mild ones. with such high kms if it's been driven pretty hard you'd have to look at the 2nd timing belt change if it hasn't been done already, compression testing for sure to make sure you don't need a rebuild now. For such a high mileage car it's worth taking it to a mechanic to do proper tests not just 'safety checks'.

Gearbox/clutch might be pretty tired if they haven't been overhauled. You're getting to the stage where, even if looked after, the drivetrain would be starting to wear out badly to the point of needing bits replaced completely like diff and engine overhauls. 4cyl turbo I think you wouldn't want to travel more than 250,000km without some form of rebuild after 10 years.

See if it runs rough idling, if it does you might need to rebuild it soon anyway there could be a lot of wear on the valves, etc. if fully synth oil hasn't been used its whole life. Also things like suspension components should be on their 2nd set and wearing out bushes, absorbers, etc. all over again. Pads and rotors may need changing and are big dollar items. Things like rust, wear to the radiator, and loose parts that just wear out over time and mileage.

d4n13l Newbie

d4n13l

Posted
  • Author
Posted

no lol thats in nsw for a start...! and thats not jdm.

i went to have a look, idles very rough, sound likes wrx, vibrations on idle. apparently one of the coilpacks have gone. car hasn't been thrashed.... dropped clutch at 2.5k rpm it slipped.! =O, but otherwise every thing is good. no rust or anything on the radiator engine bay?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • Dose Pipe Sutututu
      Unpeeling the Orange

      By Dose Pipe Sutututu · Posted

      When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Dose Pipe Sutututu
      RB20DE NEO smallbox clutch.

      By Dose Pipe Sutututu · Posted

      Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...