Jump to content
SAU Community

Sr20det Redtop Ignitor

mattsr31

By mattsr31,
in Engines & Forced Induction

 Share

Recommended Posts

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted
hey all

i think my ignitor in my s13 is dead cant find 1 anyway so is there any after maket item that can go in it place or can it be changed to ran with out it or dose anyone have

SAU was a good forum to ask about a silvia engine :(

maybe find someone who has the same engine and ask if you can swap it.

what is the issue?

Wheezy Mentor

Wheezy

Posted
Posted

Might be a silly question but have you spun the CAS by hand and checked that the plugs are firing? (IE seen the plug fire a spark?)

Also can you hear the injectors ticking away (again spinning the CAS by hand.)

If its been two years since running you may want to check that the fuel rail is not gummed up, can you smell fuel in the cylinders / coming out of the exhaust?

That is where I always start with these sort of issues >_<

Bunta Grand Master

Bunta

Posted
Posted

oh im in Brissy so coming around and grabbing one to borrow isnt really an option ha ha

if you go looking to buy one you will find that s13 and s14 have the same part number ignitor so that might widen your choices!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
×
×
  • Create New...