Jump to content
SAU Community

Recommended Posts

1989 R32 GTR including new paint engine build and gearbox build up 80,XXX k's since full rebuilt

The list:

Forged Engine

CP Pistons

JUN Oil Pump

SARD 700cc Injectors

N1 Water Pump

Oil Drain Added To The Rear Off The Head Back To The Sump

TOMIE Oil Feed Restrictors

TOMIE Sump Baffles

HKS Adjustable Cam Gears

Apexi Cams

ACL Race bearing Throughout

ARP Mains + Head Studs

TOMIE Head Gasket

HKS Timing Belt

All New Hoses And Gaskets

Also In The Bay

Oil Relocation Kit + Cooler

After Market Radiator,

After Market Cooler Piping And Radiator Hoses,

Nismo Airflow Meters,

K&N Panel Filter In Standard Airbox

New O2 Sensors

Huge 600x300x120mm Intercooler,

Garret -5s Capable Of 430+ rwkw

Gearbox Was Completely Reconditioned

Including Syncros 2/3/4/5

3/4

Every Seal And Bearing Has Been Replaced

RECENT RETUNE USING NISSTUNE 03/06/09

341rwkw on 18 psi now, on a safe tune

DYNO PAPERS PROVIDED

Other Parts Changed Out:

New Coil Packs

The Altessa Pump Changed

Hicas Lock Bar Added (Rear Powersteering Pump Impeller Taken Out To Completely Disable It But Still Keeping The Cooler)

Bilsteine Coilovers All Round.,

Very Good Condition R32 GTR Wheels

D-speed Clear Indicators,

Front + Rear Sway Bars Also One In The Middle Of The Car.

Torque Split Controller Added With a 2wd/4wd Switch (In The Console)

Boost Controller Hidden In Fuse Box.

I Am Selling My R32 GTR Because Im Going Oversees At The End Of This Month...

PRICE 24k

There Is 11 Months Rego On This Car And Will Come With RWC...

Cheers, Taner 0403172796

post-62664-1244550833_thumb.jpg

post-62664-1244550855_thumb.jpg

post-62664-1244550884_thumb.jpg

post-62664-1244550921_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/274000-r32-gtr-heavily-modified/
Share on other sites

Who built the motor? Do you have reciepts. Were you the owner who built the car or was it the previous owner?

Genuine buyer, its just that the colour looks familiar.

Cheers

You can pm me if you prefer

This was for sale by a different member (Peter is his real name) in a previous ad a few months ago (maybe more??). The lack of info and responses to genuine inquiries from this seller amazes me. Ive given up after sending 2 emails.

I have the contact info for the previous owner as I was emailing him when this car was on carsales (and here simultaneously). The distance and over the pits rego hassles, kinda killed it for me, but it's a great car.

Who built the motor? Do you have reciepts. Were you the owner who built the car or was it the previous owner?

Genuine buyer, its just that the colour looks familiar.

Cheers

You can pm me if you prefer

hey man, the previous owner was peter...

the engine was built by him and john at ices performance in rowville.

the only reason why im trying to sell the car is because i need the money as im going oversees and to buy 2 cars for myself and my brother.

im barely on SAU so just call me if you have inquiries dont email me...

my number is 0403172796 or my brother 0423350450

This was for sale by a different member (Peter is his real name) in a previous ad a few months ago (maybe more??). The lack of info and responses to genuine inquiries from this seller amazes me. Ive given up after sending 2 emails.

I have the contact info for the previous owner as I was emailing him when this car was on carsales (and here simultaneously). The distance and over the pits rego hassles, kinda killed it for me, but it's a great car.

i havnt recieved any emails from you...

i havnt recieved any emails from you...

Click on your name and view your profile.

At the bottom of the LHS is the contact information and at the bottom of that it shows your email address that you must have registered with??

It shows this:-

[email protected]

If your info is wrong, well that's your fault.

Now you spend $X (half with your brother) on buying a car and then 5 seconds later youre selling it as you realise you need a car each? Well der! WTF? I thought you were selling as youre going OS?

Ice Performance where in Cheltanham, not Rowville, there was no John there, just a Greald and Nigel, I know because they built 2 engines for me and are friends.

Cheers for the help anyway, I guess you dont know much about the engine.

Good luck with the sale buddy.

To help out the poor fella trying to sell this, it appears that the previous owner Pete, worked at ICE a while back. He now work at Rowville (I guess a mechanical workshop??). Engine definitely done at ICE though.

Im also guessing that if Nigel and Gerald are mates, ask them about Pete and this car?? I assume they must know of it?

Edited by xthommox
Click on your name and view your profile.

At the bottom of the LHS is the contact information and at the bottom of that it shows your email address that you must have registered with??

It shows this:-

[email protected]

If your info is wrong, well that's your fault.

Now you spend $X (half with your brother) on buying a car and then 5 seconds later youre selling it as you realise you need a car each? Well der! WTF? I thought you were selling as youre going OS?

yes i wanted to sell it to go oversees so i have money to spend from my half of the money that i recieve...

and then the left over i can buy another cheap car!

Ice Performance where in Cheltanham, not Rowville, there was no John there, just a Greald and Nigel, I know because they built 2 engines for me and are friends.

Cheers for the help anyway, I guess you dont know much about the engine.

Good luck with the sale buddy.

i think youve got the wrong one.

ice performance and ices performance are different...

To help out the poor fella trying to sell this, it appears that the previous owner Pete, worked at ICE a while back. He now work at Rowville (I guess a mechanical workshop??). Engine definitely done at ICE though.

Im also guessing that if Nigel and Gerald are mates, ask them about Pete and this car?? I assume they must know of it?

ahh thanks for the info =)

i dont know much about peteshistory but its good to know now he use to work at ice.

Edited by gtrkid123

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
×
×
  • Create New...