Jump to content
SAU Community

Recommended Posts

1989 R32 GTR including new paint engine build and gearbox build up 80,XXX k's since full rebuilt

The list:

Forged Engine

CP Pistons

JUN Oil Pump

SARD 700cc Injectors

N1 Water Pump

Oil Drain Added To The Rear Off The Head Back To The Sump

TOMIE Oil Feed Restrictors

TOMIE Sump Baffles

HKS Adjustable Cam Gears

Apexi Cams

ACL Race bearing Throughout

ARP Mains + Head Studs

TOMIE Head Gasket

HKS Timing Belt

All New Hoses And Gaskets

Also In The Bay

Oil Relocation Kit + Cooler

After Market Radiator,

After Market Cooler Piping And Radiator Hoses,

Nismo Airflow Meters,

K&N Panel Filter In Standard Airbox

New O2 Sensors

Huge 600x300x120mm Intercooler,

Garret -5s Capable Of 430+ rwkw

Gearbox Was Completely Reconditioned

Including Syncros 2/3/4/5

3/4

Every Seal And Bearing Has Been Replaced

RECENT RETUNE USING NISSTUNE 03/06/09

341rwkw on 18 psi now, on a safe tune

DYNO PAPERS PROVIDED

Other Parts Changed Out:

New Coil Packs

The Altessa Pump Changed

Hicas Lock Bar Added (Rear Powersteering Pump Impeller Taken Out To Completely Disable It But Still Keeping The Cooler)

Bilsteine Coilovers All Round.,

Very Good Condition R32 GTR Wheels

D-speed Clear Indicators,

Front + Rear Sway Bars Also One In The Middle Of The Car.

Torque Split Controller Added With a 2wd/4wd Switch (In The Console)

Boost Controller Hidden In Fuse Box.

I Am Selling My R32 GTR Because Im Going Oversees At The End Of This Month...

PRICE 24k

There Is 11 Months Rego On This Car And Will Come With RWC...

Cheers, Taner 0403172796

post-62664-1244550833_thumb.jpg

post-62664-1244550855_thumb.jpg

post-62664-1244550884_thumb.jpg

post-62664-1244550921_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/274000-r32-gtr-heavily-modified/
Share on other sites

Who built the motor? Do you have reciepts. Were you the owner who built the car or was it the previous owner?

Genuine buyer, its just that the colour looks familiar.

Cheers

You can pm me if you prefer

This was for sale by a different member (Peter is his real name) in a previous ad a few months ago (maybe more??). The lack of info and responses to genuine inquiries from this seller amazes me. Ive given up after sending 2 emails.

I have the contact info for the previous owner as I was emailing him when this car was on carsales (and here simultaneously). The distance and over the pits rego hassles, kinda killed it for me, but it's a great car.

Who built the motor? Do you have reciepts. Were you the owner who built the car or was it the previous owner?

Genuine buyer, its just that the colour looks familiar.

Cheers

You can pm me if you prefer

hey man, the previous owner was peter...

the engine was built by him and john at ices performance in rowville.

the only reason why im trying to sell the car is because i need the money as im going oversees and to buy 2 cars for myself and my brother.

im barely on SAU so just call me if you have inquiries dont email me...

my number is 0403172796 or my brother 0423350450

This was for sale by a different member (Peter is his real name) in a previous ad a few months ago (maybe more??). The lack of info and responses to genuine inquiries from this seller amazes me. Ive given up after sending 2 emails.

I have the contact info for the previous owner as I was emailing him when this car was on carsales (and here simultaneously). The distance and over the pits rego hassles, kinda killed it for me, but it's a great car.

i havnt recieved any emails from you...

i havnt recieved any emails from you...

Click on your name and view your profile.

At the bottom of the LHS is the contact information and at the bottom of that it shows your email address that you must have registered with??

It shows this:-

[email protected]

If your info is wrong, well that's your fault.

Now you spend $X (half with your brother) on buying a car and then 5 seconds later youre selling it as you realise you need a car each? Well der! WTF? I thought you were selling as youre going OS?

Ice Performance where in Cheltanham, not Rowville, there was no John there, just a Greald and Nigel, I know because they built 2 engines for me and are friends.

Cheers for the help anyway, I guess you dont know much about the engine.

Good luck with the sale buddy.

To help out the poor fella trying to sell this, it appears that the previous owner Pete, worked at ICE a while back. He now work at Rowville (I guess a mechanical workshop??). Engine definitely done at ICE though.

Im also guessing that if Nigel and Gerald are mates, ask them about Pete and this car?? I assume they must know of it?

Edited by xthommox
Click on your name and view your profile.

At the bottom of the LHS is the contact information and at the bottom of that it shows your email address that you must have registered with??

It shows this:-

[email protected]

If your info is wrong, well that's your fault.

Now you spend $X (half with your brother) on buying a car and then 5 seconds later youre selling it as you realise you need a car each? Well der! WTF? I thought you were selling as youre going OS?

yes i wanted to sell it to go oversees so i have money to spend from my half of the money that i recieve...

and then the left over i can buy another cheap car!

Ice Performance where in Cheltanham, not Rowville, there was no John there, just a Greald and Nigel, I know because they built 2 engines for me and are friends.

Cheers for the help anyway, I guess you dont know much about the engine.

Good luck with the sale buddy.

i think youve got the wrong one.

ice performance and ices performance are different...

To help out the poor fella trying to sell this, it appears that the previous owner Pete, worked at ICE a while back. He now work at Rowville (I guess a mechanical workshop??). Engine definitely done at ICE though.

Im also guessing that if Nigel and Gerald are mates, ask them about Pete and this car?? I assume they must know of it?

ahh thanks for the info =)

i dont know much about peteshistory but its good to know now he use to work at ice.

Edited by gtrkid123

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah nice idea, you mean to suction it to the gauges? I hadn't thought of that.
    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
×
×
  • Create New...