Jump to content
SAU Community

Recommended Posts

Hey guys, was wondering if you could help me and a mate out. We are unsure as to whether his Silvia (Q) has a CA18 or a SR20. So I was wondering if I could borrow your knowledge and help us out :) Here are the facts:

It says 2 litre on the engine casing.

It has SR20 on the sticker on the under side of the bonnet.

It says CA18 on the metal stamp next to the import stamp.

It is a 1991 model. (I think, it may of been imported in 1991)

We are unsure which to believe, the company in which he bought it from said it was a CA18 so it doesnt matter if it is, he didnt get ripped off or anything, we are just interested.

Cheers for any help in advance :)

Link to comment
https://www.sau.com.au/forums/topic/27412-is-it-a-ca18-or-a-sr20/
Share on other sites

mad max:

Is the boot badge a circle or more square?

The SR20's have a circle, the CA18's have more of a square boot badge.

Also the SR20's have round halogen lights (99% of the time) and the CA18's have the better looking square headlights.

dkonig: Be careful not to spread misinformation.. SR20's have a red rocker cover, CA18's should have a silver one.

To confuse tihngs even more, it might be a CA18 with an SR20 Engine dropped in it. :)

But yes, '91 models and above are SR20's.. And no, it would have certainly not been imported in 91.

I have not spread any mis-information, the third silver rocker covered SR20DE I have owned is parked in my driveway.

silver rocker cover with distributor rather than coil packs is from S13 Q

S13 K had the red cover and the coils

LATE S13 K had the blck rocker cover with coils but NO VVT (not sloped at the back of the cover)

S14 had the black cover but sloped at the back for vvt

S15 sort of grey colour, also sloped at back

Attached a pic of my DE (and yes I know thats a turbo on it :)

CA18DE were all Red Rocker covers except for a CA18e which was a carby smaller version of the R31 pintara motor CA20e, the ca18e which had a silver rocker cover, but this motor was only ever a Single overhead cam jusst like the CA20e.

Guest Sphyncter

ive got a ca18de red rocker silvia. dont worry about the badging and stuff cause thats no good to ya. you should be able to go from the metal stamp (next to import stamp) because these are meant to be changed whenever engine is changed (duh!) because it should have engine number on it and stuff. i know mine has had a 2L in it at some stage, but its back to the 1.8. check the metal badge, if that says 1.8 then id say its 1.8. as the guys said, without a pick we can't help ya.

as for headlights guys, mines an 88 and its got the round globes, not the square!!

-Pat

And this has been my 2 cents.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...