Jump to content
SAU Community

Recommended Posts

are you sure its a v-spec II because it is missing its carbon bonnet and rear carbon diffuser also the rear v-spec II sticker looks suss its not sitting in the right spot its too far to the left on the rear bumber, did you run the vin number through the nissan fast software?

While that may send off warning signals there are other factors that may have lead to the sticker having to be re-added to the car. resprays, accident damage or such. Its also possible that the CF bonnet may have been switched out...there are extra reasons for everything =b

As long as hes happy with it, should be all that really matters.

Cant be any worse than most of the GTS-ts in melbourne having GTR badges fitted to their boots.

Half of which are probably stolen from real GTRs...damn badge thieves.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4653954
Share on other sites

are you sure its a v-spec II because it is missing its carbon bonnet and rear carbon diffuser also the rear v-spec II sticker looks suss its not sitting in the right spot its too far to the left on the rear bumber, did you run the vin number through the nissan fast software?

Its true, my bonnet is sold cos i wanted the ztune one so alot of people will have the same thoughts and yeah the rear bar was probably resprayed due to a crappy carpark driver (my front bar has been sprayed already and needs another one again; damn careless carparks grrrrr.)

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4654000
Share on other sites

Its true, my bonnet is sold cos i wanted the ztune one so alot of people will have the same thoughts and yeah the rear bar was probably resprayed due to a crappy carpark driver (my front bar has been sprayed already and needs another one again; damn careless carparks grrrrr.)

Thanks for the backup =D

But yeah there are any number of reasons it could be like that.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4654161
Share on other sites

While that may send off warning signals there are other factors that may have lead to the sticker having to be re-added to the car. resprays, accident damage or such. Its also possible that the CF bonnet may have been switched out...there are extra reasons for everything =b

As long as hes happy with it, should be all that really matters.

Cant be any worse than most of the GTS-ts in melbourne having GTR badges fitted to their boots.

Half of which are probably stolen from real GTRs...damn badge thieves.

yes thats pathetic

theres a black R34 GT-T with a GT-R badge at the boot

the whole car looks nothing like a GT-R

to me thats degrading the GT-R image

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4655374
Share on other sites

good luck fitting the wheels!

anyway, VERY nice car Andy. wish i could afford one myself!

Haha, nah, it's a little joke between Andy and I. Told him not to put crappy wheels on the GTR! We know each other because of our STi ownership (ex for me).

From what he told me, the diffuser was stolen in Japan, and he's ordered a Top Secret diffuser as a replacement. The abscence of the carbon bonnet is a mystery..

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4655530
Share on other sites

i was thinking more along the lines of the STi being 5x100 and they actually wouldnt fit the GTR :P

+1 for who cares about where the parts have gone. he is happy, thats all that matters!

exactly right.

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4656157
Share on other sites

  • 2 weeks later...

Andy sent me a couple of pictures of his car, and i noticed something strange:

getattachmentrmn.jpg

His rear diff doesn't look like mine. Is it possible that his car is a non Vspec (without active diff)?

We're just trying to work out which exact model his car is. Is has Vspec II interior, but no bonnet or diffuser. Also his MFD doesn't display intake and exhaust temp, which i believe is featured on Vspec's...Hope i'm wrong for his sake!

Edited by Huy
Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4685429
Share on other sites

looks like it is not a v-spec II, the black interior is shared between the standard and v-spec II models from october 2000 onwards as are the N1 rear disc rotors so this is not really a way to tell the difference ,the MFD should have 7 parameters for a v-spec/v-specII/m-spec where as the standard model eg non v-spec will only have 5 parameters also check the tacho the 1 to 3 on the v-spec models will be compressed this is if it is the orginal speedo ,you can also check the code on the build plate look at the 6th letter it should start with GGJPRW the W means its a v-spec/v-spec II etc if it has a V instead of the W it is a non v-spec model

Link to comment
https://www.sau.com.au/forums/topic/274192-hiiii/page/2/#findComment-4688184
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...