Jump to content
SAU Community

Recommended Posts

yeah, as long as cops cant see the light too brightly at night it should be OK!! just turn em off when you get pulled over, then they got no proof, cause you can have them installed just not on when driving!!!

Link to comment
https://www.sau.com.au/forums/topic/27498-installing-neons/#findComment-577420
Share on other sites

I have them in my footwells and under the seats, looks awesome when the doors open, but couldnt tell if you were to drive past me on the street, just have a switch close by in the event of being pulled over and your set, no probs.

Link to comment
https://www.sau.com.au/forums/topic/27498-installing-neons/#findComment-578888
Share on other sites

when i got pulled over i got let off for the neons in the footwells because they said as long as the neon is below the height of the steering wheel and the neon was not directly visible it will be fine, but i guess that can change from cop to cop...

cheers...ben.

Link to comment
https://www.sau.com.au/forums/topic/27498-installing-neons/#findComment-581272
Share on other sites

Just thought I'd pop this up regarding the legality of non-essential lights in Victoria as it has been clarified to my workplace by the Police.

Following is an excerpt of a Road Safety statement as it applies to neon lights and such. Still trying to find an online link to the document but have had no luck as yet... (will keep looking!)

Road Safety

Non-Essential Lights

The boom of non-essential lights, including fluorescent lights under vehicles and the smaller ones on bonnets or wiper blades (generally blue in colour), on motor vehicles is continuing, creating confusion about their legality.

A little history about non-essential lights: the Road Safety (Vehicles) Regulations 1988, required motor vehicles and trailers to comply with the Standards for Registration (Victorian Government Gazette S15, 1 March 1988). Clause 702 of these Standards prohibited the fitment of lamps or reflectors that weren't required or permitted. The Regulations were repealed in 1999, as to were the standards, and replaced by the current Road Safety (Vehicles) Regulations 1999, incorporating the Standard for Registration at Schedule 8.

In making the new Regulations and Standards, Victoria adopted the National Light and Heavy Vehicle Standards. The current Standards for Registration, unlike the old, does not prohibit the fitment of lamps that are not prescribed.

What they do require, is for vehicles to be fitted with the lamps specified in the Standards and the Australian Design Rules. In addition, cluase 118(2) of the Standards allows a vehicle to be fitted with any other lamp or reflector, providing it does not show red light to the front, a white light to the rear or a light that flashes.

With regards to dazzling lights, clause 75 of the Standards stipulates a light (except a high-beam headlight), fitted to a vehicle must be built and adjusted to provide the necessary amount of light, without dazzling the driver of another vehicle approaching, or being approached by, the vehicle.

Additionally, if any light fitted to a vehicle (whether it complies or not) is used to dazzle, or in a way likely to dazzle another road user, then the driver may be charged accordingly (Road Rules-Victoria rule 219 applies).

The Macquarie Dictionary defines dazzle as 1. To overpower or dim (the vision) by intense light. 6. Temporary loss of vision, or temporary reduction of visual activity, related to the presence of a bright (possibly moving) source of light.

VicRoads' guideline (Vehicle Standards Information Sheet 8) permits the fitting of additional forward and rearward facing lamps, which comply with or are permitted by the Standards. Mandatory light fitted to a vehicle must continue to comply with the relevant Standards.

If a vehicle is fitted with lights in accordance with the Standards and used in accordance with the Road Rules-Victoria, then police can take no action. If a light fitted to a vehicle does not comply with the Standards, then a defect notice may be issued and the driver charged accordingly. As to the use of flourescent lights under vehicles and the blue lights fitted to vehicle bonnets or wiper blades, providing they do not dazzle other road users, they are quite lawful.

[End Quote]

So essentially in Victoria, as long as no additional light shows no red light to the front (making other drivers think you have your brakes on), white light to the back (making other drivers think you are in reverse), flashes or dazzles, you're clear.

This went through the courts here not long ago, where someone got charged for having windscreen washer LEDs. He won his case in court, and all fines issued to people for having these LEDs installed had to be reversed.

Hope this clarifies things a bit!!!

Link to comment
https://www.sau.com.au/forums/topic/27498-installing-neons/#findComment-583781
Share on other sites

Wouldn't say they'd call neons a dazzling light.... Basically they mean any light that "blinds" you (high beams, spot lights, etc.) is a dazzling light. Neons are fine. (In Vic. anyway.)

I have questioned it myself I must admit, IMHO I think that the high-brightness LEDs on windscreen washers are dazzling, I also think the rear red fog lights on Excels are dazzling and they should all be recalled and defected! But they're not...

We have been trying to get info on legislation for the various states, it hasn't been easy. I spent an hour trying to find the document I quoted from on the web, to no avail. Ended up typing it all.

From the layout of the document it came from the vicpolice.vic.gov.au site. We have been looking for a statement like this for a while, and finally received this last month. Haven't seen anything from any other states though.....

Link to comment
https://www.sau.com.au/forums/topic/27498-installing-neons/#findComment-584135
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Got you mate. Check your email!
    • I see you've never had to push start your own car... You could save some weight right now...
    • Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
    • Hi, Got the membership renewal email but haven't acted yet.  I need to change my address first. So if somebody can email me so I can change it that would be good.    
×
×
  • Create New...