Need To Remove Aftermarket Boost Solenoid

[sky_high_psi]

ok so i need to remove my aftermarket boost solenoid to clear an epa

the bloke said it needs to have a stock solenoid (i dont even know what a stock one looks like)

is it possible to run the car without a solenoid in other words just connect the actuator into the cooler piping? what would happen?

[ashr32]

If you have a r33 gts-t it will cause you to run at the low boost setting only. with the Solenoid connected it raises your boost after 4500rpm to 7psi from 4 or 5psi depending on your mods with a standard Solenoid.

[ashr32]

If you have a r33 gts-t it will cause you to run at the low boost setting only. with the Solenoid connected it raises your boost after 4500rpm to 7psi from 4 or 5psi depending on your mods with a standard Solenoid.

if its a r32 gts-t then dont worry there isnt one. it will run 10psi all day give or take a couple of psi bases on your current mods.

Just remove it and plumb it back

[sky_high_psi]

if its a r32 gts-t then dont worry there isnt one. it will run 10psi all day give or take a couple of psi bases on your current mods.

Just remove it and plumb it back

yeah i got a 32 and thats what i thought 10seconds after i posted the question

thanks for the confirmation