Jump to content
SAU Community

Recommended Posts

Item: R33 stuff.

radiator support panel ,cut behind strut towers $250ono

cross member (k frame) $150ono

steering rack complete from ti rod to ti rod $180ono

steering rack minus passanger side rack end and ti rod end $100ono

series 1 head lights a pair $300

series 1 rh front bumper blinker $30

dash pads x2 , 1 coverd in genuine white swade $250ono,1 stadard $120ono

series 1 steering wheel $40ono

series 1 front seats $100 a pair

rear seat x2 $50 each

set of 5 aus approved seat belts $150

set of 4 door cards $200 i also have other single door cards $60 each ono

set of 4 inner door/roof molds $100set

hood lining x2 $40ono each

carpot in mint conditon $80ono

kyb suspention $350ono

rear cradle $150ono

rear upper and lower control arms lh side $100ono rh side $100ono

rear hubs complete with brake calipors, lines, hubs, rotors $220ono

front sway bar standard $50ono

rear sway bar standard $50ono

front hubs and rotors $150ono

tail lights and covers x2 and i have 3 colours 2 chose from ,white,marone,red $150 a pair has bolb loom with them as well

x4 power window motors x2 lh and x2 rh $60 each

rear bumper covers and suport bars x2 $100 ono each

series 2 boot wings x2 $120 each in white and 1 in marone

boot lid with shaved boot lock lil ding $80 ono

space saver wheel like new tyre $100ono

set of glass minus front window has tint $250 for the set i paid more just for rear window at a inport wreakers

lots more stuff i will add when i rember or just ask if there is sum think you need i might have it cheers

Location: tweed valley i can deliver to sum places as i work all over the gold coast

Website: here

Item Condition: great

Reason for Selling: not needed

Price and Payment Conditions: as above but make offers

Extra Info: just ask if needed

Pictures: can get but only on dial up atm

Contact Details: here

Link to comment
https://www.sau.com.au/forums/topic/275656-lots-of-r33-parts/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

sorry to pll that have pmed me i cant return a pm till my topic cound reachs 10

i do have the a/c pipe skibbo

to thoose who pmed me i pnly have rh side fron lower control arm x2 no lh 1z sorry

the marone boot wing i looked at today has sum clear pealing but yeh i can post at your cost cheers

yeh ill post power window motor for $65 if your keen punisher6942

i should have those triageler plastic bits aidan make offer

isoru yeh still got sway bars ,sorry silbastian dont no if they fit r32

sorry still cant pm ppl so if you want these parts pm me your number and part you want and ill give you a call cheers

sweet as dude ill take one of the drivers side power window motors off ya hands for sure. Text me your bank details and ill transfer the funds when i get your details. My number is 0423819988 and the name is daniel. Ill look forward to hearing from you mate

n/a beast (james) give me your numba and ill give you a call cheers

punisher ill give you a call tomos cheers

sorry ppl i still can pm due to post count no being 10 or sum crap

Edited by DRB25

hey DRB25 still waiting on that phone call or text message with ur banking details champ..... and just want to clarify that the power window motor is in 100% working order???

Hey mate,

Can you give me an address to come and see the car? jus wanna have a look at headlights and some other bits and pieces. The headlights will fit my R33 GTS series 1 aye?

My mobile number is 0402859795.

Cheers mate.

I live in Southport

sorry to pll that have pmed me i cant return a pm till my topic cound reachs 10

i do have the a/c pipe skibbo

to thoose who pmed me i pnly have rh side fron lower control arm x2 no lh 1z sorry

the marone boot wing i looked at today has sum clear pealing but yeh i can post at your cost cheers

hey mate its skibbo here my number is 0415554917 for the big ac hose from fire wall to compressor how much to send to sydney all up cheers mate sydney 2753

Edited by skibbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...