Jump to content
SAU Community

Recommended Posts

I thought that these were sold off, however after weeks of communication the seller has pulled out, which means that some other lucky SOB will get these beauties on their ride

F: 18" x 8" + 23 (Advan RS2 semi slicks, just under the markers)

R 18" x 9" +21 (Michelin Pilot Sport 2's, also under the markerS)

These are PERFECT FITMENT FOR GTST, the rears stick out about 1cm from the guard, but if you have rolled or flared guards and stretch on some 235's they look absolutely AWESOME.

The come with:

- Original Volk Black Lug Nuts w/ Lock Key

- Original Volk Centre Caps

Here are some pictures of them:

On the car:

post-14346-1245739850_thumb.jpg

Without tread:

post-14346-1245739686_thumb.jpg

post-14346-1245739707_thumb.jpg

With Tread:

post-14346-1245739654_thumb.jpg

THEY HAVE JUST BEEN RE-POLISHED, NO SCRATCHES OR GUTTER RASH

THESE RIMS ARE IN MINT CONDITION, YOU WILL NOT FIND BETTER UNLESS YOU BUY THEM BRAND NEW FOR $1,500+ A WHEEL.

PRICE: $2700 PICK UP, OR $2800 SENT VIA COURIER ANYWHERE IN AUSTRALIA.

PM ME IF YOU ARE INTERESTED, THEY ARE LOCATED IN MELBOURNE, VICTORIA.

THANKS ALL :P

Link to comment
https://www.sau.com.au/forums/topic/276060-18-volk-gtc-8-9/
Share on other sites

THE PRICE IS $2700 NEGOTIABLE EVERYONE

Spoil your baby, buy her some new shoes...she will turn heads like you would not believe!!!

Just check out the first picture....these wheels definitely MAKE the car :P

Link to comment
https://www.sau.com.au/forums/topic/276060-18-volk-gtc-8-9/#findComment-4674442
Share on other sites

Cheers Troy!!

I too hope that they will clear your calipers as i know you would look after these babies just as much as i did.

And he's not wrong ladies and gentlemen - these wheels will transform your car EPICLY!!

Link to comment
https://www.sau.com.au/forums/topic/276060-18-volk-gtc-8-9/#findComment-4675133
Share on other sites

THESE RIMS ARE STILL FOR SALE

$2500 PICK UP FROM MELBOURNE, OR CAN COURIER TO YOUR DOOR AT YOUR EXPENSE.

COME ON GUYS, THESE RIMS ARE VERY RARE TO FIND WITH PERFECT FITMENT FOR GTST's!!!!!!!!!!!!!!!

Link to comment
https://www.sau.com.au/forums/topic/276060-18-volk-gtc-8-9/#findComment-4682671
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
×
×
  • Create New...