Jump to content
SAU Community

Rb20 Silvertop Conversion Into A Hr31 Passage Question?

HR31-PASSAGE
 Share

Recommended Posts

HR31-PASSAGE Veteran

HR31-PASSAGE

Posted
Posted

hey guys

just a question if i replace my rb20 redtop with a rb20 silvertop or even might be thinking of a rb25 (engine, gear box, ecu & loom) will i have to get the engine tuned to suit my hr31 passage if it comes straight out of a running r32? or will it still run fine?

also are there any mods i should know about to do the conversion?

cheers for the help guys

_Ryan_ Grand Master

_Ryan_

Posted
Posted (edited)

use the loom and standard ECU of the motor you put in.... and put an RB25 in there, Phantom32 is selling one out of his R32 for ONLY 1500... i have seen people pay that much for RB20's!

Edited by RB_Ryan
HR31-PASSAGE Veteran

HR31-PASSAGE

Posted
  • Author
Posted
use the loom and standard ECU of the motor you put in.... and put an RB25 in there, Phantom32 is selling one out of his R32 for ONLY 1500... i have seen people pay that much for RB20's!

can i reuse my original loom thats in the car already? for either a rb20 or rb25??? or are they both different?

cheers

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...