Jump to content
SAU Community

Recommended Posts

I require such a simple and small item, that no-one appears to have:

GReddy Oil Temperature sensor adaptor (Part #16400713)

You wouldn't believe how many shops I have tried for such a simple thing that converts the OE R32 GTR oil temp sender thread (M12x1.25) to an aftermarket oil temp sender thread (1/8" NPT)

I have tried Pirtek, Enzed and various other suppliers that deal with

fittings to no avail.

Will pay be any preferred method: COD, Money Order, Direct Deposit, Credit Card, etc.

Link to comment
https://www.sau.com.au/forums/topic/27719-greddy-gauge-adaptor/
Share on other sites

I think you'll have to do what I had to do to fit my oil temp probe, and that's buy a fitting and get a machine shop to modify it and put the correct thread on it for you.

I've attached a pic of the adaptors you can buy from VDO.

If I was you (if you can't find one that's correct) is buy on of these that has a bigger outside thread, and a smaller inside thread and then take it to a machine shop and get them to machine the correct threads on it for you.

To do this same thing to my oil temp adaptor cost me $18. Not much really.

But it's important that you buy one that has enough brass around it that they can machine it down to the right size.

Good luck

J

Jay95R33, you're an absolute legend for replying so quickly and even taking the time to post a pic grabbed from the VDO catalogue. Cheers...

What you have suggested was going to be my last resort. I suggested this idea to all parties, including Pirtek, Enzed and even my engineer which does custom stuff for me, but they all reckon that by the time you have machined the thread down from say M14 down to a M12 thread, this would leave a VERY thin wall. like around 1mm - 2mm at the most in the overall thinkness of the brass. (prone to failure: cracking & leaking. and at worst: possibility of brass fragments breaking off into the oil supply system!:eek: )

I will do this if i have no luck in sourcing the purpose-made GReddy product. Best price so far was $35 but this was ex-Japan and tacked onto a larger order to avoid the rediculous freight charges. And Also around 3 weeks wait...

Anyone else know who STOCKS these here, in Australia?

methinks you're right.. i'll see if i get any response on here anyway, but it'd be a shame to order such a small part from Japan for such a high expense and long wait.:( Pity i don't need anything substantial ordered from Japan at the moment...:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...