Jump to content
SAU Community

Recommended Posts

Hey Guys,

We all know that mechanically that 2 door and 4 door skylines are basically the same right?

When installing my suspension, I discovered that a rear Strut Brace off a 2 door wont fit a 4 door variant.

Please post here any other minor differences U have discovered between a 2 and 4 door.... :)

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/278-4-door-r33-skyline-owners-look-here/
Share on other sites

Hey again steve,

Suspension kits, coilovers, shocks and front strut tower braces are definately the same. Rear shocks are also same between 2 and 4 door. Just design of rear shock assembly differs, hence no rear strut tower brace needed.

Exhaust system looks identical between the 2 but I purchased the car with turbo back 3"freeflow exhaust so not 100% sure.

BTW, the diff housing differs slightly between R33 Auto and manual. I'm having trouble putting my 4.11 ( thought it was 3.9 but it was 4.11)from a manual non ABS R33 2 door into a Auto R33 4 door with ABS.

I'll have 2 wait until the manual conversion happens before i can install this diff centre.

The ABS sensors R giving us a headache....back 2 the drawing board.

Its turning out 2 be 1 big learning process 8O

  • Like 1
  • 6 years later...

Longtime, Resurecting Thread, But i Think its needed.

R33 S2 Coupe Headlights dont fit S2 4 door, without modification to Loom, and Modification to Radiator Support

Washer Bottle Is mounted Right where Intercoolers Go, unless you go the JJR Stealth or ARC Style Kits.

battery in s2 4 doors, is mounted in Engine bay, however s1 4 doors, has them in the boot like the coupes.

The A Pillars are also slightly wider, which means the Greddy Guage Pods etc.. Dont fit without mods.

  • Like 1

Greedy intercooler kits over come the washer bottle problem. I know it was a long time ago but there is no real reason to run a rear strut brace, all ready plenty of strength back there I think.

Does anyone know about cages? If anything can be slightly modified to fit? or if anyone sells them.

Ok, so here are some photos of my drinks cooler (I presume??) and yes it is "stock". Obviously some type of factory option, maybe someone with an 33 options list could help me out here? Got to remember Nissan offered things like roof racks, umbrellas and other crazy shit with the skylines.

post-19787-1222386667_thumb.jpg

post-19787-1222386678_thumb.jpg

Seriously... TooBad. It is worth the extra coin to get yourself a proper intercooler kit like GReedy and save yourself the hassle and embarrassment that I presume comes with owning a shitty china copy.

These kits have EVERYTHING that you'll need including instructions even how to bend the horns perfectly out of the way. You won't be out there trying to cut your cooling fans fins (no shit..see it happen) to make the crappy pipes fit nor adjusting and re-welding dodgy brackets to hold everything in place.

They are f**ken fantastic :P

The below picture shows that the stock washer bottle can also be kept with an easy ad on bracket but GReedy do supply a smaller washer bottle if you are too lazy to make up this bracket.

post-19787-1222387209_thumb.jpg

Edited by gunmetalgrey

i have a s2 33 4 door and bought a china cooler kit (stupid i know but i had to completley butcher my front bar and completly remove the fog/indicator assemblys.:( also had to remove my underguard washer bottle and havent been able to find anything to suit since..... let alone any room to fit a washer bottle seeing my battery is in the spot where a 2 door washer bottle would be.

any solutions???

  • 4 months later...
  • 2 weeks later...

When installing my suspension, I discovered that a rear Strut Brace off a 2 door wont fit a 4 door variant.

Rear strut brace does fit, have one in my 33 seriesII sedan. Just drilled holes in strut towers, couple of panel bolts and body washers did the trick. The factory braces were actually a dealership option on the coupes, except GTR's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...