Jump to content
SAU Community

Recommended Posts

Hey guys,

I've noticed recently that my car takes a long time to start.

I've put on a turbo, intercooler, had a quick tune at gavin woods, so somewhere in there something has happened.

Everything works perfectly, but i used to turn the key for a quarter of a second and get it started, now i'm sitting there for a few seconds while the starter motor keeps trying to get it started, sorta like if you have a low battery, but i've only had this battery a few months and i've done a few highway runs so i know it would have good charge (and it's not doing 'slow' starter motor sounds).

What could this be? I've tried searching for a few terms but can't find anything helpful.

Thanks :D

Link to comment
https://www.sau.com.au/forums/topic/278922-r33-takes-long-time-to-start/
Share on other sites

Hey guys,

I've noticed recently that my car takes a long time to start.

I've put on a turbo, intercooler, had a quick tune at gavin woods, so somewhere in there something has happened.

Everything works perfectly, but i used to turn the key for a quarter of a second and get it started, now i'm sitting there for a few seconds while the starter motor keeps trying to get it started, sorta like if you have a low battery, but i've only had this battery a few months and i've done a few highway runs so i know it would have good charge (and it's not doing 'slow' starter motor sounds).

What could this be? I've tried searching for a few terms but can't find anything helpful.

Thanks :D

[/quote

Battery could be too low of CCA capacity. Try fitting a known good larger battery out of another vehicle to see if it changes on crank. I would still put my money on the battery regardless of age.

as has been said, could be the battery not having enough amps, or it could be a fuel or spark issue. if you haven't changed the plugs in a while, might be worth replacing them (doesn't hurt and they are pretty cheap at only a few dollars each)

how about new injectors or spark plugs? had them changed recently?
as has been said, could be the battery not having enough amps, or it could be a fuel or spark issue. if you haven't changed the plugs in a while, might be worth replacing them (doesn't hurt and they are pretty cheap at only a few dollars each)

Injectors and Spark Plugs haven't been touched since it was working fine a month ago.

I've put in a bosch 040 pump, could that have changed anything?

It could yea. did your fuel pressure get changed? what injectors do you have now? If you got a new turbo etc you must have already upgraded them? What turbo did you get?

try the obvious first and charge your battery before worrying too much about other things though.

Maybe with your new tune/setup your spark plugs are struggling a bit.

Injectors and Spark Plugs haven't been touched since it was working fine a month ago.

I've put in a bosch 040 pump, could that have changed anything?

yes its your fuel pump that is causing the "problem"

try turning your ignition on without starting the car... allow the pump to prime and put pressure in the rail and then try and start

should start first time :D

Injectors and Spark Plugs haven't been touched since it was working fine a month ago.

I've put in a bosch 040 pump, could that have changed anything?

spark plugs wear out over time and injectors get dirty. might be worth just pulling a few plugs out to have a look at them and see if they look like they are fouling up at all.

was it doing it before the fuel pump went in or did it start just after?

as has been said, make sure you give the pump time to prime before turning over. if you are and it still doesn't start easily then you can pretty much rule out the pump as it shouldn't affect things once primed.

yes its your fuel pump that is causing the "problem"

try turning your ignition on without starting the car... allow the pump to prime and put pressure in the rail and then try and start

should start first time :P

spot on, this was exactly how my car needed to be started after putting in an uprated fuel pump.

turn your car to acc, wait a sec then try turning it over.

Did you install a check valve on the fuel pump. If not, when you turn the pump off all the fuel will flow back through the pump back into the tank. So when you go to start it next time there will be no pressure in the lines. Install a check valve or you will need to prime the pump a few seconds more than normal before you start the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...