Jump to content
SAU Community

Recommended Posts

hey all im gna get torched for this but i really need to borrow a 28mm ringy... im putting my hicas lock bar in and its being a kent!

my ring set doesnt go that big so its stupid to buy one for 2 bolts lol....

*needs to have an open end*

cheers :blink: ps ill pick it up/drop off obviously.

Link to comment
https://www.sau.com.au/forums/topic/279287-need-to-borrow-a-28mm-ring-spanner/
Share on other sites

hey all im gna get torched for this but i really need to borrow a 28mm ringy... im putting my hicas lock bar in and its being a kent!

my ring set doesnt go that big so its stupid to buy one for 2 bolts lol....

*needs to have an open end*

cheers :blink: ps ill pick it up/drop off obviously.

where abouts are you adam ?

Is this to crack then ends on the HICAS unit? If so I used a set of pump pliers like these

Did the trick just right for me buddy. Like you I didn't have a spanner big enough so I had to get creative

ok just went out too the shed when i did mine and my sons i used a 5/8 withworth spanner that i have it measures 27.93 mm worked a treat

ps mine is a heavy duty open ended spanner if thats any good too ya

Edited by mid life crisis

im at burnside :)

i tryed heslo but ive got stabilizer bars so it gives me less movement :D ive msgd luke hopfuly he delivers the goods :iluvff:

does any one know if the hicas arms undo at the wheel end? i undid a bolt but i got no movement :S its a weird squishy ball joint thing :S.....

Edited by chef_stagea
im at burnside :P

i tryed heslo but ive got stabilizer bars so it gives me less movement :P ive msgd luke hopfuly he delivers the goods :P

does any one know if the hicas arms undo at the wheel end? i undid a bolt but i got no movement :S its a weird squishy ball joint thing :S.....

Got the same bars man, still could do it.

The arms should undo at the other end, but to be honest never really tried. Easier to get it apart while it's all on the car however mate :)

Got the same bars man, still could do it.

The arms should undo at the other end, but to be honest never really tried. Easier to get it apart while it's all on the car however mate :P

:P round 2 ding ding!..... spose ill toughen up!

Could u jack it up and get a air gun onto it?

lukes jackshake brings all the guns to the yard and they like 'yo mines bigger than yars' damn rite, mines bigger than yars, i could sell u a kit, but id have to charge

-D

hey mate. didnt fit no :) but thats kool i managed to get it done... when do u need it back?? do u rekn i could like post it to ya :S lol

surprised it didnt fit maybe the stags are a little diffrent from the r33 you can post it if ya like dont know what that would cost tho lol or send it by courier too profix pooraka what ever is easier

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...