Jump to content
SAU Community

Recommended Posts

Hey guys,

I've got my old rb26 that i'm stripping. Almost everything is available apart from the injectors, harmonic balancer and coils. I havent stripped it back yet but will start soon so photos will crop up in the not too distant future.

Fuel Rail + Regulator $100

Intake Plenum $100

Injector plate $300

Throttle Bodies and linkages $300

R32 Turbos x2 Good Cond bugger all shaft play $300 for the pair

R32 Turbos x2 appear to be recently rebuilt, sweet fa shaft play. Came off fresh motor from jap land. 1 has a stiff wheel from not being used for ages but should free up just fine when installed and run. $200Ea

Stock Cam Gears 2x pairs available $50 per pair

Brand new nissan timing belt $70

Water Pump appears to be near new $50

Wiring Loom $400

CAS Sensor and bracket $200

Stock r32 dump pipes 2 pairs available $30 a pair

Rocker Covers (no valley cover sorry :bunny: )$100

Cam Cover $50

Starter Motor $50

P/S Pump $50

HKS SSQV with weld on adapter $200

Brand New Nissan Thermostat $30

Engine Mounts, look to be good cond $80 (for Left & Right)

Oil Cooler assembly $150

Manifold x2 $100 (for both)

GTR Sump including diff $350

RB26 Flywheel with stock clutch appears to be in good nick $150

2x A/C Compressors unknown condition but look good $80 ea

Oil & Water hard Lines (the ones running above the turbo's) $100

Dipstick and Tube $20

Oil Cap $10

Cam belt idler and tension pullies 2x sets $30 per set

Alternator recently rebuilt $60

Manifold Heat Shields $40 (pair)

Heaps more parts for sale, thus i'll try and get them up shortly too!

Block, Head, Crank, pistons, rods etc will all be for sale once i've stripped the motor to look at their condition.

Please contact me via p.m. and i shall try to get back to you asap!

Cheers,

Rob

Hey mate i cant send a pm for another hour so i'll shoot a reply here,

Thermostat will cost $6 to post in a postpack satchel.

Only need one thermostat but its not in the bottom of the radiator, its in the block near the waterpump. Im selling the mechanical thermostat that controls the flow of coolant through the radiator.

The item thats in the bottom of the radiator is a thermostat switch for the overheat fan which i unfortunatly do not have a spare to sell :)

Hope this helps!

Cheers,

Rob

ill take the Brand New Nissan Thermostat $30.. pm me price posted to 3355

can someone confirm only one need for r32 gtr, located bottom of radiator?

Edited by WhO

Hey guys,

Sorry for any slow replies, i can only seem to send 1pm per 30 minutes which is making things a bit tricky! I'll endeavour to reply as soon as possible however i am only usually home after 7pm and have limited internet access during the day which makes replying a bit tricky.

Can all enquiries be directed to [email protected] from now, this e-mail i check every day and can reply to quickly!

Dipstick and tube - sold pending payment

AAC valve & 1 cam gear set - sold pending payment

Hey guys,

For some reason my mail is bouncing out of the e-mail address [email protected]

so please send all mail to [email protected]

Sorry for the inconvenience guys, damnn :)

JFKGTR - Unfortunately i dont have the rubber flex bits for sale as im using them on my new motor :ninja: Plenum is available tho for $100

To all, im in Adelaide btw and pickup of parts is fine!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...