Jump to content
SAU Community

[syd] Impul Rs 17' Rims, R32 Caster Radius Rods With Adjustable Poly Bushes

chiksluvit
 Share

Recommended Posts

chiksluvit Experienced

chiksluvit

Posted
Posted (edited)

Hi,

I have a set of rims with tyres for sale.

Rims are Impul RS, they're 17x8 on all four, 3 piece wheels with polished rims, rears have some dish in them, front offset is +38 and rear offset is +32, one of the front ones have a slight dent on the inside and it'll cost about $100 to get repaired, it doesnt leak air.

comes with tyres, rear tyres have some serious camber wear, but front Yokohama tyres still have about 30~40% thread.

asking $400, pickup only, located in kograh

also a set of factory R32 GTST radius rods, comes with polyurethane bushes in good condition, they're eccentric for caster adjustment,

asking $100, will ship these interstate at buyer's expense.

Edited by chiksluvit
chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted

hi,

these wheels will definitely fit r32 and S14/15 as well

clears R33 brake calipers fine, so they won't have issues with R32, silvia, R34 calipers

cheers

R 2 THE J Rising Star

R 2 THE J

Posted
Posted

How BAD is the dent?

is it drivable?

Is it necessary to fix?

Is it noticable from the outside?

Can the rears be fitted to the front of a 33 and clear the calipers aswell?

chiksluvit Experienced

chiksluvit

Posted
  • Author
Posted
How BAD is the dent?

is it drivable?

Is it necessary to fix?

Is it noticable from the outside?

Can the rears be fitted to the front of a 33 and clear the calipers aswell?

Its drivable, doesnt leak air, not noticable from the outside since its on the inner rim edge.

I would get them repaired though for peace of mind, dents like this cost about 100ish, ok for street driving as you won't notice during street driving 80 and below, I'll take a photo of it if I go tomorrow

The rears can't be fitted to the front, rear wheels won't clear the front calipers, due to the depth of the wheel stud holes/ thickness of the 5 spoke disc.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...