Jump to content
SAU Community

Recommended Posts

Hi,

I have a set of rims with tyres for sale.

Rims are Impul RS, they're 17x8 on all four, 3 piece wheels with polished rims, rears have some dish in them, front offset is +38 and rear offset is +32, one of the front ones have a slight dent on the inside and it'll cost about $100 to get repaired, it doesnt leak air.

comes with tyres, rear tyres have some serious camber wear, but front Yokohama tyres still have about 30~40% thread.

asking $400, pickup only, located in kograh

also a set of factory R32 GTST radius rods, comes with polyurethane bushes in good condition, they're eccentric for caster adjustment,

asking $100, will ship these interstate at buyer's expense.

Edited by chiksluvit

hi,

these wheels will definitely fit r32 and S14/15 as well

clears R33 brake calipers fine, so they won't have issues with R32, silvia, R34 calipers

cheers

How BAD is the dent?

is it drivable?

Is it necessary to fix?

Is it noticable from the outside?

Can the rears be fitted to the front of a 33 and clear the calipers aswell?

How BAD is the dent?

is it drivable?

Is it necessary to fix?

Is it noticable from the outside?

Can the rears be fitted to the front of a 33 and clear the calipers aswell?

Its drivable, doesnt leak air, not noticable from the outside since its on the inner rim edge.

I would get them repaired though for peace of mind, dents like this cost about 100ish, ok for street driving as you won't notice during street driving 80 and below, I'll take a photo of it if I go tomorrow

The rears can't be fitted to the front, rear wheels won't clear the front calipers, due to the depth of the wheel stud holes/ thickness of the 5 spoke disc.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...