Jump to content
SAU Community

Recommended Posts

ok,

this is probably a really stupid question, but i was wondering the best way to rip a fat burnout in a manual.

Auto V8's are easy... doesnt take a brain surgeon to work that one out... but i want to be able to rip a fat burnout in a manual, without shifting off the original line.. any suggestions.

i have found a few different ways, but none are perfect and most the tail likes to step sideways a bit when im doing it...

dave ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/
Share on other sites

I'm going to assume that this question is in regards to burnouts when warming tyres at a legal drag meet.

1. Push clutch in

2. Select a gear (1st is simple but 2nd warms up better)

3. Build up the revs to a nice high rpm. I recommend 8,000.

4. Drop the clutch and quickly move foot from clutch to brake.

5. Heat till satisfied.

6. Serve hot.

;):D:D:D:D:D:D

It's difficult to stop the back from sliding out, but it's something you just need to live with ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585363
Share on other sites

lol... the colt.

OR... adding to leewah (which is by far the easiest and most effective)

You can use heel/toe.

Use your toe to build up revs... then put down the brake... then bring off the clutch.

It's just easier to do leewahs ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585448
Share on other sites

I know what leewah has - but the person asking the question doesnt have what leewah has - get it?

Telling someone to launch at 8000 revs when their car doesnt go that far [from factory] doesnt make sense...

anyway who cares - I have a STAR ;) !!!

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585719
Share on other sites

oh also, when you do this at the drags, how much tire tread does it take off... cos i reckon i took about half the tread off these brand new (3000km) tires in 4 or 5 burnouts.

Thanks - just wanting to know so when i get back to melb i can push the liner into a high 13 for my first ever official drag.

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585898
Share on other sites

Originally posted by NismoR34

I know what leewah has - but the person asking the question doesnt have what leewah has - get it?

Telling someone to launch at 8000 revs when their car doesnt go that far [from factory] doesnt make sense...

anyway who cares - I have a STAR :P !!!

my 33 hits 8000rpm (rev limit set at 8500 for some reason) but i dont think i will go that far.. in my pissy 205 tires i only need to dial up 4k..

now getting a v8 up to 8k and dropping , that could be fun.. thats about 3000rpm over the red line :P

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-585908
Share on other sites

ok im back in here - for a minute.

I still dont think its reasonable to advise people to launch at 8,000rpm - thats my point, always has been my point. And 8,000 rpm wont be necessary or possible on the average "forum user's" car!

As I said, mine will do burnouts easily launching from 3,000 - 5,000rpm so why bother with maxing your revs out just on launch? Its going to climb up to the max rpm very quickly in 1st or 2nd anyway...

Dave I think I can safely assume you are not in the category of having:

A: A GTR

B: An RB26

C: A Worked RB26

D: A Huge Aftermarket Turbo hanging off an RB26

E: A 700HP+ engine

Maybe I am wrong. This type of setup probably does need much higher revs than your average liner to invoke wheelspin, though I am sure its fun!

My main point is I think YOUR original question [the reason we are in this thread] wasnt answered effectively, thus I tried to help. I also think a lot of other forum goes will be looking in here and trying to learn from the Q&A's

/end rant

HKSgtst - hover your cursor over the star and some magic will happen :( Works differently depending on star colour ;)

Link to comment
https://www.sau.com.au/forums/topic/28109-burnouts-d/#findComment-586705
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • UPDATE: Yes the GSP Axles are compatible. I installed it on my R34 today and they are working a treat! Turns out that the S13, S14, S15, and 200 SX all used the same axles as the HR34, and ER34 NA models. Which is 2 bolt x 3 pairs.  
    • Also build this EH ute with 370z motor and gearbox with a couple of turbos just for fun.  
    • Got the passenger door on plus the master cylinder and booster. Loaded up to take it home. At home, the colour changes a lot in the light.
    • Nothing cheap, but I have seen the AC Hydraulic DK13HLQ which is pretty close to what you're asking for. The problem is the hydraulic cylinder mandates that the back of the jack be a certain height and Skylines have fairly deep inset floor jack points. A more certain and cheap option is to get some nominal 2x10 inch lumber boards and have one board be 1.5 feet, the other board 3 feet. Glue it all together with lots of clamps to maintain pressure. Make two of these. The ramp suggested above is a good idea, it takes quite a bit of clutch slip to get over each of the boards. I only need the first ~1.5 inches for my low profile jack on a standard ride height car but a lowered car you want to go up to the full ~3-3.5 inches. Paint it or store indoors if you want it to last.
    • Ok. And Nistune? I read (here too) mainly on Stagea threads that it can by "turn off" with Nistune. But they say they still had the sensor plug in. Next week iam going to the Nistune(and other ECUs) tuner so i can finally make it work. I drove the car home and apart from the cut it drove great. No misfire no smoke no hesitation or rough start...so hoping it is this sensor that is missing  
×
×
  • Create New...