Jump to content
SAU Community

Recommended Posts

When the board crashed it deleted my post so let's try this again.

Most of these parts are off/for an R34GTT. Aside from generics - Apexi BOV, Gauge etc

Any offers that are reasonable will be considered.

R34 standard suspension

Taken off @ 60,000km

No problems whilst they were on the car

Taken off to fit Tein Coilovers

$150

post-26304-1248934055_thumb.jpg

R34 standard exhaust

Full system - Dump pipe to muffler

$100

No pictures of this - can get some if someone needs it. Otherwise everyone knows what the system looks like.

R34 standard wheels

Good condition

One wheel has gutter rash

Not sure about tyres

$300?

post-26304-1248934321_thumb.jpg post-26304-1248934344_thumb.jpg

post-26304-1248934356_thumb.jpg

R34 side mount intercooler

Bottom row has been dented up (see pictures)

Was working fine

No leaks

Comes with shroud for standard bar

$150

post-26304-1248934453_thumb.jpg post-26304-1248934476_thumb.jpg

R34 standard airbox with snorkel

$70

post-26304-1248934611_thumb.jpg post-26304-1248934633_thumb.jpg

R34 standard indicators

Front & side

$60

post-26304-1248934691_thumb.jpg

Whiteline front Swaybar Links for R34GTT

Brand new in package

$110 (RRP $150)

post-26304-1248934752_thumb.jpg

Fibreglass Nismo/Altia front bar

Never fitted or painted

$200

post-26304-1248934813_thumb.jpg post-26304-1248934846_thumb.jpg

R34 standard coil packs

One is faulty - unsure which

$150 or $25 each

post-26304-1248935247_thumb.jpg[

Neo engine cover

Good condition

$40

post-26304-1248935342_thumb.jpg

R34 standard intake pipe

No leaks

$30

post-26304-1248935412_thumb.jpg

Apexi Spec II BOV

Installed for 2 weeks max

Two small scratches but otherwise good condition

Comes in original box w/ manual

$250 (RRP $350)

post-26304-1248934948_thumb.jpg

Apexi boost gauge

60mm

Bar reading

Excellent condition

$120

post-26304-1248935007_thumb.jpg

Takata shoulder/harness pads

Brand new in box

Perfect if your harness is digging into you

Made of thicker padding than your average pads

$70

post-26304-1248935090_thumb.jpg

Automatic transmission cooler

No leaks

$30

post-26304-1248935148_thumb.jpg

Larger items are pick up only (Brisbane Southside)

Postage will be included in some items prices not in others.

Depends on the size (=price)

post-26304-1248934222_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/281213-r34-parts-new-used-brisbane/
Share on other sites

When the board crashed it deleted my post so let's try this again.

Most of these parts are off/for an R34GTT. Aside from generics - Apexi BOV, Gauge etc

Any offers that are reasonable will be considered.

R34 standard suspension

Taken off @ 60,000km

No problems whilst they were on the car

Taken off to fit Tein Coilovers

$150

post-26304-1248934055_thumb.jpg

R34 standard exhaust

Full system - Dump pipe to muffler

$100

No pictures of this - can get some if someone needs it. Otherwise everyone knows what the system looks like.

R34 standard wheels

Good condition

One wheel has gutter rash

Not sure about tyres

$300?

post-26304-1248934321_thumb.jpg post-26304-1248934344_thumb.jpg

post-26304-1248934356_thumb.jpg

R34 side mount intercooler

Bottom row has been dented up (see pictures)

Was working fine

No leaks

Comes with shroud for standard bar

$150

post-26304-1248934453_thumb.jpg post-26304-1248934476_thumb.jpg

R34 standard airbox with snorkel

$70

post-26304-1248934611_thumb.jpg post-26304-1248934633_thumb.jpg

R34 standard indicators

Front & side

$60

post-26304-1248934691_thumb.jpg

Whiteline front Swaybar Links for R34GTT

Brand new in package

$110 (RRP $150)

post-26304-1248934752_thumb.jpg

Fibreglass Nismo/Altia front bar

Never fitted or painted

$200

post-26304-1248934813_thumb.jpg post-26304-1248934846_thumb.jpg

R34 standard coil packs

One is faulty - unsure which

$150 or $25 each

post-26304-1248935247_thumb.jpg[

Neo engine cover

Good condition

$40

post-26304-1248935342_thumb.jpg

R34 standard intake pipe

No leaks

$30

post-26304-1248935412_thumb.jpg

Apexi Spec II BOV

Installed for 2 weeks max

Two small scratches but otherwise good condition

Comes in original box w/ manual

$250 (RRP $350)

post-26304-1248934948_thumb.jpg

Apexi boost gauge

60mm

Bar reading

Excellent condition

$120

post-26304-1248935007_thumb.jpg

Takata shoulder/harness pads

Brand new in box

Perfect if your harness is digging into you

Made of thicker padding than your average pads

$70

post-26304-1248935090_thumb.jpg

Automatic transmission cooler

No leaks

$30

post-26304-1248935148_thumb.jpg

Larger items are pick up only (Brisbane Southside)

Postage will be included in some items prices not in others.

Depends on the size (=price)

hey mate .. where bouts in brissy are you???

intrested in the exhaust... consider sold

PM sent.

Also, no damage to the bar. Just never got around to fitting it and have lost interest now.

Sorry Skyline33, not interested in organising postage for the shocks..

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
×
×
  • Create New...