Jump to content
SAU Community

Recommended Posts

I am selling my body kit moulds. they are the moulds used to make parts such as bumpers, side skirt's, wings etc.

with a little patience and fibreglass knowledge you can mould and or mildly customize a kit for your car.

I am happy to offer advice if your new to fibreglassing and moulds.

As a member since 94, some of you know me from the forums, and others who have bought some of these parts may recognize some of this stuff.

below are the pictures of the respective parts for sale as they appear on the cars fitted.

All of these fit R33's and All parts can be made to your own individual strength needs including Carbon Fibre

white 33 has the drift or stealth wing (3 pics) the made up part sells for around $200

charcoal 33 has the GTR front bar and GTR sideskirts (4 pics) the made up part sells for around $250 and $200 respectivly

Morone 33 has the GTR grille (4 pics) the made up part sells for around $80

Greddy Trust Pod pillar guage mount (4 pics) the made up part sells for around $100

Black 33 has the Trust front bar with eyelids (1 pic) the made up part sells for around $250

I also have R33 GTR rear pods not pictured the made up part sells for around $60 each

To help put things in perspective, A front bar mould to make would cost around $800

I am willing to split up some of these parts and others i would prefer to sell as a whole, ideally i would like to sell the whole lot as a lot for a largely discounted price of $1250.00

Individually i will part with,

Trust front bar mould $400

Stealth/Drift win mould $350

R33 front bar mould $400

R33 GTR side skirts mould $400

R33 GTR grille mould $150

R33 GTR rear pods $200

R33 Pod pillar guage $150

feel free to email, [email protected] or phone 0413 714 354

cheers bj.

PS: if anyone is interested i have a Toyota supra bonnet and side skirts aswell.

post-9238-1249017613_thumb.jpg

post-9238-1249017644_thumb.jpg

post-9238-1249017712_thumb.jpg

post-9238-1249017929_thumb.jpg

post-9238-1249018528_thumb.jpg

post-9238-1249018596_thumb.jpg

post-9238-1249018661_thumb.jpg

post-9238-1249018701_thumb.jpg

post-9238-1249018723_thumb.jpg

post-9238-1249018747_thumb.jpg

post-9238-1249018779_thumb.jpg

post-9238-1249018952_thumb.jpg

post-9238-1249018975_thumb.jpg

post-9238-1249019000_thumb.jpg

post-9238-1249019035_thumb.jpg

post-9238-1249019057_thumb.jpg

Edited by The Sherrid
Link to comment
https://www.sau.com.au/forums/topic/281357-body-kit-moulds/
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...