Jump to content
SAU Community

Recommended Posts

Hi.

I am looking to buy a new car for myself, however I noticed that all the dealer's cars have very low km's on them. (e.g. 60,000 - 80,000km). This seems impossible considering the cars are 10-11 years old. (the r34 turbo's in particular)

I believe the cars have been around the clock once before or someone has reset them... but not real sure.

If any one could help me out here it would be greatly appreciated.

Thanks, From Luke.

Link to comment
https://www.sau.com.au/forums/topic/281433-buying-from-a-dealer/
Share on other sites

there are a few things to remember about cars from japan. 1: japan is a small place so that means that not much long driving is done. 2: japan has a very good public transport system so some people with cars won't drive them all the time. 3: while the car may only low kms on it, even if they are genuine kms, the engine may have much more wear than that due to sitting in traffic for long periods of time. the engine is still wearing while it is idling.

but yes, most imports that come into australia have had some 'tweaking' done. the biggest issue that this creates is that it can then mean that the timing belt gets left until well overdue before it is changed. however there would be some genuine km cars that come in. i have a 9 year old pulsar with 50,000kms on it. i have owned it for 6 years and only put 27,000kms on it in that time.

when looking at a car it is best to compare the kms on the clock to the condition of the car. if the car is extremely neat and has low kms then there is more chance of it being genuine, but it is going to be a good buy even if the kms are a bit higher than what the odometer says. if the kms are low and the car looks a bit tired then it is a bit obvious that things are a bit suss. but it is a case at looking at the right things. just because it has dodgy panels doesn't automatically mean the engine has done lots of kms.

  • 5 weeks later...
when looking at a car it is best to compare the kms on the clock to the condition of the car. if the car is extremely neat and has low kms then there is more chance of it being genuine, but it is going to be a good buy even if the kms are a bit higher than what the odometer says. if the kms are low and the car looks a bit tired then it is a bit obvious that things are a bit suss. but it is a case at looking at the right things. just because it has dodgy panels doesn't automatically mean the engine has done lots of kms.

^^^ Ditto

An extra item to look at is the set of Keys.

I have a GT-R with only 34500Kms with Japanese history & I'm the 1st owner in Oz.

Carpet's like new.

Seat Bolsters are like new.

Steering Wheel is like new.

And since I have a full complememt of transponder keys, you can tell that all the keys are like new.

(So have a look at the key teeth as well as all other checks and balances)

Along with everything thats been mention, always should get the car checked out by a mechanic that you trust before you hand over the cash, because that way, even if you think the car is all good and clean, a experienced mechanic can tell you exactly what sort of condition the car is in.

But to be honest, I think buying a R34 GTT off a dealer is a bit of a rip.... They all put up the price and over charges everyone ($20,000-$25,000).

I think it's better off buying it privately, but just make sure you get the car checked out before you buy it. That way, you might save yourself a few grand. I just bought my manual GTT for $16,500 on the road off carsales, its got 105,000km on the clock, but the condition its in, is immaculate, its so good that the seller even serviced the car with nissan lol :laugh:

^^^ Ditto

An extra item to look at is the set of Keys.

I have a GT-R with only 34500Kms with Japanese history & I'm the 1st owner in Oz.

Carpet's like new.

Seat Bolsters are like new.

Steering Wheel is like new.

And since I have a full complememt of transponder keys, you can tell that all the keys are like new.

(So have a look at the key teeth as well as all other checks and balances)

im not saying that your cars km's arnt geniune, but it is possible that they could just replace all those things you mentioned to make it look new...trust me some people have extreme measures.

im not saying that your cars km's arnt geniune, but it is possible that they could just replace all those things you mentioned to make it look new...trust me some people have extreme measures.

Possible? Yes it's possible. You've used the correct word "...possible..."

But when you are discriminating and collecting 'jigsaw puzzle' pieces that fit and fit well, you then take the next step...

eg wife reads all the Japanese paperwork

eg take along a mechanic familiar with the Skyline

eg take along a panelbeater

eg compression testing

eg 100s of messages thru the steering wheel and the seat yaddayadda

Even buying from a Dealer can contain pitfalls when all the Dealer wants to do is 'sell another car' > CAVEAT EMPTOR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...