Jump to content
SAU Community

Recommended Posts

Hi guys, not sure where to put this post. As you know I love shopping for car accessories.. it's my retail therapy :(

Trying to get some roof racks for my daily, and have been doing some research. Wanted to find one that would suit different cars. Mainly use it to deliver random stuff like furniture from IKEA etc. I figured the delivery costs from 6 different shops would buy me a set of roof racks that I can keep, so I should go down this path.

Had a look around and the one that seemed to fit my needs is the prorack whispbar from NZ. It looks good, is apparently the quietest/most aerodynamic/most fuel economical on the market, lockable and you don't have to buy new ones when changing cars, just new feet.

http://www.prorack-international.com/au/Products/Whispbar/

Just wondering if anyone had any experience with this bar as there are no reviews on the net at all. I'm worried because of it's shape it will sag more easily. It's also pricey at around $330 installed, and the warranty is only 3 instead of 5 years from others (eg., Thule), so I wanted to hear other's opinions before I took the plunge.

Thanks very much.

Link to comment
https://www.sau.com.au/forums/topic/282221-roof-racks/
Share on other sites

i was gona say.. haha.

Racks on a merc, that will use a gutter mount set up from memory. Pro rack issn't a bad brand cheap and does the job. Honestly i wouldnt go with Thule because you're pretty much paying for the brand. We use to deal with Thule at work and still do but we don't stock their stuff we just order by demand.. normally we get more people asking for Rola or Rhino.

So to answer ur question in short the Pro rack would be a cheap and good option. But thats just my 2 cents and opinion :P

Jin

Link to comment
https://www.sau.com.au/forums/topic/282221-roof-racks/#findComment-4758358
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...