Jump to content
SAU Community

Recommended Posts

Ok,

Rianto wanted me to post this...so that I can share with all those considering the swap....

I bought a set of 2005 350z shocks and springs that did low kms for an inflated price due to the demand for them!

These were fitted last weekend...

Pics of V35 with stock suspension...

aBefore001.jpg

aBefore002.jpg

aBefore003.jpg

Pics of V35 after the 350z suspension was installed...

aAfter001.jpg

aAfter002.jpg

aAfter003.jpg

Thoughts...

1. Was it worth the money?

A. Definitely!!!!

2. How does the 350z suspension compare with the V35's suspension?

A. 350z is a tad more bouncy/bumpy, however, still very very comfortable

3. How much did it lower the sedan?

A. As you can see, it's about 1 inch.

4. Which stock springs and suspension is lighter?

A. The 350z ones are slightly lighter....say, maybe 500 grams lighter overall...It definitely felt a bit lighter when I carried them...

5. How difficult was it to fit the suspension?

A. Well, I didn't want to dirty my hands/fingers, since I now got an office job for 3 mths, so I took it to my family mechanic and he charged me $120 (quite expensive)....It took him about 1 - 2hrs as he also gave my brakes a clean... So, it is not hard to fit....

6. How have the 350z springs changed the handling dynamics of the car?

7. Have you gotten around to getting a full wheel alignment yet? (1" drop can still make a lot of difference toe wise)

congrats you seem very satisfied with them :P

How much did the z suspension worth? + $120? To be honest I didn't see a difference at first look on before and After fitment until having a second close look. At least you reckon it's worth it And comfy.

Wheel alignment? Kidding, right? I spoke to the mechanic about it, he says not to even worry about it...

Handling characteristics? At very slow speeds on bumpy roads, I feel it is a tad bumpy...almost feels like coil overs...so i was quite surprised by that. Turns into corners, etc with no noticeable difference. However, my Mrs says the car doesn't feel as refined now due to the bumpiness. Anyway, I have been driving it to work everyday and it is fine for me...Feels like I am in a sportscar now....hehehe...

if you even remove a shock and replace the SAME one, you should get a wheel alignment. because you have lowered the car your toe has been affected (as already posted) and youre gonna f**k out your new tyres

spend the $60 and get a 4 wheel alignment or spend $800+ on a new set of tyres in about 5000km

wait till u put 20in low profile tyres, the bump nag will increase

oh, man u got nagging trouble waiting around the corner soon lol

I can even tell straight away when going from profile 45 on 18in to profile 35 on 19in that it gets bumpier on stock shocks , let alone from 17 to 20 like what u're planning to do...

^^^^+1 for wheel allignment if you value your tire wear. I've had z suspension in my car forabout a year now and have to admit it was he best bang for buck mod. Will start to explore height adjustable coilovers soon as I want to go a bit lower.

wait till u put 20in low profile tyres, the bump nag will increase

oh, man u got nagging trouble waiting around the corner soon lol

I can even tell straight away when going from profile 45 on 18in to profile 35 on 19in that it gets bumpier on stock shocks , let alone from 17 to 20 like what u're planning to do...

agree with rianto, going from 18s to 19s is still bearable. Think twice before going to 20s. And to achieve the VIP look you are after you would need a much bigger drop than z suspension

Wheel alignment? Kidding, right? I spoke to the mechanic about it, he says not to even worry about it...

:D personally, if he told you that i wouldn't worry about going back to see him

any decent tyre shop can do an alignment for around $40-$70 and 15 mins, it will bring your tyres back into spec

as you may already know even a 1" drop can make your wheels go from this ||-o--o-|| to this //-o--o-\\

maybe not a drastic change but enough to make a difference to your tyre's overall wear and life

couldn't agree more. I had a whiteline kit in my old R33 whichc lowers it by about 1"

although the neg camber increase was subtle and it works a treat on the race track, on the road it worn the inside of my front tyres in less than 10000km

for street use I recommend keeping the front alignment camber degree as stock as possible, if you want more corner handling, get a front caster rod bush/arm and increase your caster, so when your steering wheel is straight the wheels will be ||-o--o-|| and when you're turning right it's //-o--o-//

or \\-o--o-\\ when turning left (this is if viewed from behind). with that setting when turning in addition to body roll/centrifugal shift to one side, your setup on the road will push it towards a more 'neutral' corner ||-o--o--|| during hard cornering and you get more grip.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...