Jump to content
SAU Community

Recommended Posts

Not having much luck selling my car complete so looking at striping it down and selling some parts if I can get the right $$ and then I will keep the shell and build it up later. I will post up as much info as I can but I am still trying to find all my stuff as the car engine etc was built about 4 years ago and I cant remeber it all.

Whole car is for sale other section, asking 20k, if I can get serious buyers for some stuff here I will start stripping car down. For now will try and keep chassis so I can rebuild it later. Wont to get a Stagea for now as the kids can ride around it that a lot easier.

Engine: R33 RB25,2630cc?, fully built engine by Nisspeed here in Adelaide. Engine was built, engine dyno tuned and fitted in car, we used it for 12 months at about 4 drag meets and very little street use. Engine was stipped down to check it out and have a look, sump baffels were istalled, new rings and since then it has only just been started. Engine includes

RB26 crank balanced, streightened and ground

RB26 rods preped with ARP bolts

ARP cradle studs

Wiesco forged 87mm pistons

sump mods for anti oil surge

Metal head gasket

N1 oil/water pump

New thermostat

RB25 head ported

HD valve springs

HKS? 272 and 264 cams ( one was new the other as good as cant remember the exact specs)

HKS adjustable exh cam gear

ARP head studs

RB26 clear cover - modified

R33 CAS

Rocker covers painted gloss balck with -10 fittings for the breather pipes

engine does not include inlet/exh manifold/PS pump/alternator/

Price: $6000

Turbo Setup

Garret GT3040, 0.82 exh housing

Blitz? Stainless low mount manifold - this thing is a work of art, I got it SH but in exc condition and modified the flanges to suit

Tial 38mm external gate

Will also include 3.5" dump pipe off turbo and screamer pipe off wastegate, as well as oil drain pipe for turbo, braided oil and water feed lines for the kit

Turbo and gate were new and are still in as new condition

$2000

Inlet:

Custom inlet manifold on std runners - old Subzero type one, with 70mm? 5ltr holden throttle body

Includes alloy fuel rail with 75lb ~800cc Holley injectors

Sard pressure reg

Injectors, reg and fuel rail were new, mainfold SH but polished up

$1200

Fuel System

SX fuel pump, good for 700 HP

SX fuel filter

Alloy surge tank with pump and filter mounted on plate

Fuel cell about 30 ltr and lift pump

all conected with stainless braided teflon lines, all parts purchased new

$700

ARE cooler, 600x300x100 Bar and plate, 2.5" inlet, 3" outler,

anyone that knows ARE stuff know it is top quality, with cast end tanks for optimum flow etc, barely a mark on the cooler

$800

ARE 40mm radiator, duel pass cross flow, fits my 32, not sure if 33 etc are the same, includes large themo fan (15" ?)

$600

R33 RB25 gearbox, good contition still shifts smooth as, includes slave cyl

$1000

OS tripple plate clutch, clutch was used but I put new plates through it, includes flywheel, pressure plate, etc

$500

Conversion kit to put R33 box in R32 includes modified 1 piece tail shaft, modified gearbox mount

$100

Also have cooler piping in 2.5" and 3'' stainless, painted silver with tial BOV, and inlet pipe, 4" with big K&N filter can can include some of this if you buy multiple parts.

Motec M800 ECU, with custom wiring loom for the engine, AEM CDI unit, Bosch external coils and leads, Motec has wide band lambda enabled and comes wilth all sensors, looms, plugs etc. This will do almost anything you require of it on any engine. $4500

AIM Pista data logger/dash, this unit replaces all your gauges in the car, full graphic displace and interfaces with ecu via Can bus. Does lap times/track mapping, shift light warnings etc. Comes with lap timer, speed senor, 2 x temp probes and everything else you need see http://www.aimsportsystems.com.au/mxl_system.html

$1700

Blitz Duel SBC spec R boost controller, as new, $500

All parts are still in car so only have these photos.

Prices listed are fairly firm, and for those that have done these mods will know they are probably at least half of what it costs to get done.

Dyno sheet attached of what the car did on the roller at about 1.4 bar boost

Please contact me by email [email protected]

post-429-1250065828_thumb.jpg

post-429-1250065908_thumb.jpg

post-429-1250065971_thumb.jpg

post-429-1250066010_thumb.jpg

post-429-1250066088_thumb.jpg

Have interest in just the exhaust manifold, so if you wont just the turbo may seperate.

Also willing to trade for a stockish RB20/25 set up just so the thing can get moving if this stuff sells

Yeah, thats the starting cost for the unit, then add your looms, sensors, upgrades. The cost inlcludes the CDI unit, coils and all looms are made to suit your Std RB20-25-26. Includes the wideband lamda upgrade so you can monitor your AFR accurately and log them.

May go a little lower but it is not one of the parts I especially wont to sell as I know it will do anything that I require of it in the future and the replacement cost will be a lot more than I will get for it.

are you flexable on the motec?

Trade they are under 3 grand to buy the unit.

Will do Built RB25/26 engine for 5k

Motec M800 looms CDI and all the senrsors coild etc for 4k

Will include tailshaft etc with gearbox if someone needs it for a conversion

Aim Dash, $1500

Will do deal if someone wonts multiply parts and willing to look at swaping stock engine setup, thanks

interested in clutch depending how much meat is left on it mate

Had somone else interested in clutch, if he does not reply in the next day will let you know, clutch had new plates put through it and has done little work since so will be 90% plus on them, thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
    • sensible choice....and all 32s should be in yellow
×
×
  • Create New...